We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Rebound Effect Generated by Waste HDPE in Hot Asphalt Mixtures
AI summary Read the abstract
Researchers analyzed the feasibility of incorporating waste high-density polyethylene (HDPE) into hot asphalt mixtures using a dry method at concentrations of 0.5 to 5 percent, finding that high HDPE percentages (4 and 5 percent) triggered a rebound effect that prevented proper compaction. Laboratory tests including Hamburg wheel tracking revealed that excessive HDPE content compromised mixture performance, establishing upper limits for plastic waste incorporation in asphalt applications.
The feasibility of using high-density polyethylene (HDPE) waste in hot asphalt mixtures was analyzed, with particular focus on the rebound effect generated during compaction. Traditional asphalt mixtures without additives were evaluated alongside mixtures modified with varying percentages of HDPE waste (0.5%, 0.62%, 1%, 4%, and 5%) through the dry method. In this method, crushed HDPE was incorporated as an aggregate within the asphalt mixture structure, added prior to the introduction of the asphalt binder. Laboratory tests assessed compaction, specific gravity (Gmb and Gmm), void content, and resistance to permanent deformation via the Hamburg wheel tracking test. The results indicated that high percentages of HDPE (4% and 5%) triggered a rebound effect that hindered proper compaction of the mixtures, thereby compromising structural integrity. Conversely, mixtures with lower HDPE percentages (0.5% and 0.62%) exhibited better compaction, although they remained comparable to the traditional mixtures without plastic. In conclusion, HDPE does not constitute a viable option for enhancing the properties of asphalt mixtures at high percentages due to elastic behavior during compaction, which introduces densification irregularities. However, some benefits were observed in mixtures with low HDPE percentages, including improvements in stability and resistance to deformation. Nonetheless, these advantages are insufficient to justify replacing traditional asphalt mixtures.
More Papers Like This
The Use of Recycled Plastic in Asphalt Pavements: Feasibility Study
AI summary Read the abstract
A feasibility study found that incorporating recycled waste plastics into asphalt via a dry-process method improved rutting and moisture-damage resistance when aggregates were pre-heated to higher temperatures. Diverting waste plastics into road construction represents a promising strategy to reduce the volume of plastic waste that would otherwise degrade into environmental microplastics.
The Use of Recycled Plastic in Asphalt Pavements: Feasibility Study
AI summary Read the abstract
Researchers used an in silico bioinformatics pipeline to identify two novel PETase enzyme candidates from thermophilic bacteria that show promising structural stability and robust hydrogen bonding for enhanced PET plastic degradation. This advances the search for enzymatic solutions to plastic pollution, potentially enabling biological breakdown of PET — a major source of microplastic fragments — under a wider range of environmental conditions.
Developing Sustainable Asphalt Mixtures Using High-Density Polyethylene Plastic Waste Material
AI summary Read the abstract
Researchers evaluated asphalt mixtures incorporating high-density polyethylene (HDPE) plastic waste as a sustainable road pavement material, assessing whether recycled plastic can improve or maintain pavement performance while addressing plastic waste disposal.
A Comprehensive Review on the Use of Polyethylene Waste in Hot Mix Asphalt: Material Properties, Performance Enhancement, and Sustainability Perspectives
AI summary Read the abstract
This review examines the use of low-density and high-density polyethylene waste as modifiers in hot mix asphalt, finding that PE incorporation can improve binder performance and pavement durability while diverting plastic waste from landfills. The authors assess material properties, environmental benefits, and economic considerations, positioning plastic-modified asphalt as a viable circular economy approach in road construction.
Utilizing waste polyethylene for improved properties of asphalt binders and mixtures: A review
AI summary Read the abstract
Researchers reviewed the performance effects of incorporating waste polyethylene into asphalt binders and road mixtures, finding that PE modification improves rutting resistance, durability, and fatigue life while offering a co-benefit of diverting plastic waste from landfill — though optimal dosage and blending method vary by PE form.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.