We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Effect of Mechanical Recycling on Structural Modification and Mechanical Behavior of PET
AI summary Read the abstract
Successive mechanical recycling cycles of PET plastic were shown to cause chain scission and reduce molecular weight while maintaining stable tensile mechanical properties with over 400% elongation. The findings suggest that structural modifications from recycling affect processing characteristics more than final product performance, offering guidance for optimizing recycled PET applications.
Climate change and the engendered environmental stress are putting pressure on the search for greener solutions. One striking example of environmental stress is plastic pollution (Geyer et al., Sci Adv. 2017, 3, e1700782). Besides reducing plastic consumption, recycling is today one of the applicable approaches (Damayanti and Wu, Polymers 2021, 13, 1475). In this context, poly(ethylene terephthalate) (PET) is in the spotlight. More than having unique properties, PET occupies the podium of recycled polymers worldwide today (Damayanti and Wu, Polymers 2021, 13, 1475; Welle, Resour. Conserv. Recycl. 2011, 55, 865–875). However, despite efforts in PET recycling and the extensive number of published papers on the subject, many challenges continue to restrain its development. One of the reasons for this is a lack of understanding of the structural modifications caused by processing. Moreover, these changes impact both the processing step and the final product properties. This study focused on the effect of the mechanical recycling process on the mechanical response of PET. By successive cycles of extrusion and injection molding, recycled PET (rPET) could be produced and characterized. The widely described chain scission was confirmed by size exclusion chromatography. The consequent loss of viscosity was observed during the processing and by rheological measurements, rendering the process more and more challenging. A modification of the crystallization kinetics was also brought to light by different techniques, such as differential scanning calorimetry and polarized light optical microscopy. Despite the different effects on the matrix, the mechanical characterization showed a stable response. Tensile properties showed a highly ductile material with more than 400% elongation for both virgin and rPET. The notch sensitivity of this material was also observed in Izod impact tests, remaining relatively low but stable. A better understanding of the relationship between structural modifications and final properties may enable fine-tuning of impact modifier structures to enhance rPET toughness and broaden its applications.
More Papers Like This
A Review on the Formulation and Rupture Properties of Polyethylene Terephthalate in a Mechanical Recycling Context
AI summary Read the abstract
This review examines polyethylene terephthalate's structural and mechanical properties before and after mechanical recycling, detailing how degradation mechanisms during reprocessing affect the quality of the final product. The authors identify key knowledge gaps around structural modifications caused by processing and highlight widely used reinforcement techniques along with their limitations for industrial PET recycling.
Investigation of Thermo-mechanical Degradation of Polypropylene-Low Density Polyethylene Blends Exposed to Simulated Recycling
AI summary Read the abstract
Researchers simulated repeated mechanical recycling of polypropylene blended with low-density polyethylene through up to five extrusion cycles, finding that while chain scission increased melt flow rate and reduced crystallinity, the blended material retained mostly acceptable mechanical and thermal properties, supporting PP/LDPE recycling as a viable waste-reduction strategy.
Recycled Polyethylene Terephthalate (rbPET) from Post-Consumer Water Bottles: Chemical and Thermal Properties
AI summary Read the abstract
Researchers developed a custom device to extrude post-consumer PET water bottles into recycled filament for 3D printing, demonstrating through thermal and chemical analysis that the mechanical recycling process preserves PET's key functional properties — including glass transition, melting temperature, and chemical structure — without significant degradation.
Molecular and material property variations during the ideal degradation and mechanical recycling of PET
AI summary Read the abstract
This review analyzes how repeated mechanical recycling of PET degrades its molecular and material properties—such as molecular weight, viscosity, and crystallinity—across multiple cycles. Understanding these interconnected changes is essential for assessing the feasibility and limits of PET mechanical recycling in a circular economy.
Extrusion and Characterization of Recycled Polyethylene Terephthalate (rPET) Filaments Compounded with Chain Extender and Impact Modifiers for Material-Extrusion Additive Manufacturing
AI summary Read the abstract
Researchers developed recycled PET plastic filaments with improved mechanical properties for use in 3D printing, by adding chain extenders and impact modifiers during processing. Converting plastic waste into 3D printing feedstock offers a pathway to upcycle PET bottles that would otherwise fragment into microplastics in the environment.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.