0
Article Sign in to save

Properties of Surface Water; Adsorption Kinetics and Mechanism of Arsenic and Lead Ions Removal Using a Matrix Technique

AI summary Read the abstract

Researchers tested powdered eggshell as an adsorbent to remove arsenic and lead from contaminated river water, achieving near-complete removal rates of 99.98% and 99.99% respectively. The study found that ion exchange and precipitation were the primary mechanisms driving this highly effective low-cost water treatment approach.

Study Type Environmental

In this article, the effectiveness of adsorption techniques in removing arsenic(As) and lead(Pb) ions from the typical heavy metals contaminated surface (Tac) of the Aponmu River at different pH values (7.2, 6.4, 3.2 and 11.5) was determined using powdered eggshell. The initial dosage of selected water characteristics (pH, dissolved Oxygen, chloride, suspended solids, turbidity, As, dissolved oxygen (DO), Pb, and chemical oxygen demand (COD)) of the raw water was determined. The findings established that the average dosages of the selected pollutants were 6.48, 88.73 mgl-1, 255.67 mgl-1, 97.44 mgl-1, 290.44 NTU, 0.79 mgl-1, 0.55 mgl-1, 3.71 mgl-1 and 188.36 mg-1, for pH, dissolved Oxygen, chloride, suspended solids, turbidity, As, Pb, DO, and COD, respectively. In the case of adsorption, Pe was able to remove 99.98 % and 99.99 % of As and Pb dosage, respectively. Adsorption kinetics were in the range of 0.12878 and 0.37051, 0.0782 and 0.31757 for As and Pb respectively. It was concluded that adsorption mechanisms for these selected toxic pollutants (As and Pb) were mainly ion exchange and precipitation.

More Papers Like This

Article Tier 2

Enhanced vector transport of microplastics-bound lead ions in organic matter rich water

AI summary Read the abstract

Researchers evaluated how pristine and aged polyethylene microplastics adsorb Pb2+ ions in water under varying pH, ionic strength, contact time, Pb2+ concentration, and humic acid (HA) concentration, finding that HA enhanced lead adsorption onto aged microplastics and that maximum adsorption occurred around pH 5-6, demonstrating the vector transport potential of microplastics for lead in organic matter-rich waters.

Article Tier 2

Arsenic adsorption by functionalized polystyrene microplastics: kinetics and mechanisms

AI summary Read the abstract

This study investigated arsenic adsorption characteristics for As(III) and As(V) onto two functionalized 80–82 nm polystyrene microplastics—carboxyl-modified (PS-COOH) and amine-modified (PS-NH2). PS-COOH achieved higher maximum adsorption capacities of 0.57 mg/g for As(III) and 0.37 mg/g for As(V), with hydrogen bonding, hydroxyl complexation, and electrostatic forces identified as key mechanisms via pseudo-second-order kinetics and Langmuir isotherm modeling. Adsorption was significantly inhibited by increasing salinity and humic acid, confirming that microplastics can alter the environmental behavior of arsenic in aquatic ecosystems.

Article

Adsorption Performance of Fe–Mn Polymer Nanocomposites for Arsenic Removal: Insights from Kinetic and Isotherm Models

AI summary Read the abstract

This study evaluates iron-manganese polymer nanocomposites as adsorbents for removing arsenic from contaminated water, characterizing their adsorption capacity, kinetics, and selectivity under varying conditions. The nanocomposites demonstrated high arsenic removal efficiency, attributed to the synergistic interaction between Fe-Mn oxides and the polymer matrix, which enhanced surface area and active binding sites. The results suggest these materials are promising candidates for low-cost, effective arsenic remediation in drinking water systems.

Article Tier 2

[Adsorption Characteristics of Arsenic on UV-aged Polypropylene Microplastics in Aqueous Solution].

AI summary Read the abstract

This study examined how UV weathering (aging) changes the ability of polypropylene microplastics to adsorb arsenic from water, finding that aged plastic had rougher surfaces and more oxygen-containing groups, which enhanced arsenic adsorption. Environmental factors like pH and dissolved organic matter also influenced how much arsenic stuck to the plastic. Because aged microplastics bind more arsenic, they could carry this toxic heavy metal into aquatic food webs more effectively than pristine plastic particles.

Article

Material Properties, Characterization, and Application of Microcellular Injection-Molded Polypropylene Reinforced with Oyster Shells for Pb (II) Adsorption Kinetics from Aqueous Solutions

AI summary Read the abstract

This review covers the material properties of microplastics, including size, shape, polymer composition, and surface chemistry, alongside the analytical methods used to characterize them. The paper also discusses how these physical and chemical properties influence microplastic behavior in environmental and biological research contexts. It serves as a practical reference for standardizing microplastic characterization across studies.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper