We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Physicochemical Aspects Regarding the Sustainable Conversion of Carwash Slurry as Coverage Admixture for Landfills
AI summary Read the abstract
Researchers characterized the physicochemical composition of carwash slurry, finding quartz, calcite, clay minerals, and nano-sized plastic particles (60–90 nm) associated with phthalates. Blending the slurry with fertile soil at up to 60% concentration supported grass germination, suggesting a sustainable reconversion pathway for landfill rehabilitation.
Transport and vehicle traffic are closely connected with particulate matter (PM) pollution, inducing various fractions into the atmosphere, some of them forming significant deposits on the surface of the car. They are washed away during carwash-inducing slurries collecting the PM deposits, which are characteristic of a large area. Crystalline PM matter was investigated by XRD coupled with polarized optical microscopy (POM). Organic matters were investigated by Fourier-Transform Infrared spectrometry (FTIR) and gas chromatography, GC-MS. Their microstructure and elemental composition were investigated by SEM-EDX. The crystalline features contain mainly quartz, calcite, and clay (muscovite and kaolinite) particles having traces of goethite and lepidocrocite. Slurry particle size distribution was established by sieving on the following meshes: 63 µm, 125 µm, 250 µm, 500 µm, 1000 µm, 2000 µm, and 4000 µm. Coarse fractions of 250–4000 μm are dominated by quartz and calcite particles. The quartz and calcite amount decreases with particle size, while the muscovite and kaolinite amount increases in the finest fractions of 0–125 μm. Organic matter was evidenced, firstly, by FTIR spectroscopy, revealing mostly CH2; C=O, and NH4 bonds that are more intense for the fine particulate fractions. The organic deposits form mainly amorphous crusts associated with micro- and nano-plastic particles related to the phthalates and traces of the washing detergents. Atomic Force Microscopy revealed their size range between 60 and 90 nm and evidenced nanoparticles within samples. The nanofractions adhere to the bigger particles in humid environments, assuring their immobilization to reduce their hazardous potential. Carwash slurry blending with fertile soil ensures proper grass seed germination and growth at mixtures of up to 60% slurry, allowing its sustainable reconversion as soil for landfill and dump rehabilitation, preventing the PM emission hazard. Blended compositions containing more than 60% slurry have noxious effects on the grass seeds, inhibiting their germination.
More Papers Like This
Colloidal organic pollutants in road runoff : sources, emissions and effective treatment technologies
AI summary Read the abstract
This PhD thesis systematically investigated organic pollutants in urban road runoff, finding that PAHs, aliphates, and phthalates are transported in nano- and micro-sized emulsions (30–660 nm), and demonstrating that sorption filters using activated carbon, peat, or pine bark can achieve up to 100% removal of these colloidal contaminants from stormwater.
After Rubber Meets the Road: a Comprehensive Geochemical Analysis of Tire- and Road-wear Particles in Urban Environments
AI summary Read the abstract
This dissertation investigated the physical and chemical characteristics of tire- and road-wear particles (TRWPs) in urban environments through morphological analysis and stormwater sampling. Higher-density TRWPs showed greater mineral encrustation, and leaching experiments confirmed ongoing release of toxic organic compounds like benzothiazole into urban runoff.
Characterization of Particles in Road Surface Sediments for Analyzing Runoff Behavior of Microplastics
AI summary Read the abstract
Researchers characterized physical properties — density, shape, and material composition — of particles in road surface sediments and stormwater catchpit deposits in Japan using density-gradient separation, image analysis, and ATR-FTIR, finding that synthetic polymers comprised 40-50% of all particles and were concentrated in high-density fractions with Feret diameters of 500-800 micrometers.
A critical review of sampling, extraction and analysis methods for tyre and road wear particles
AI summary Read the abstract
Researchers critically reviewed all available sampling, treatment, and analytical methods for tire and road wear particles (TRWPs) across water, air, road dust, and sediment matrices, identifying optimal approaches (SEM-EDX, 2D-GC-MS, LC-MS/MS) and proposing standardized research frameworks for TRWP characterization.
Microparticle pollution in the light of polymer materials recycling
AI summary Read the abstract
A review of polymer plastics and microparticle emissions finds that while recycling is promoted as a sustainability solution, reprocessing and washing cycles can increase the release of microparticles into the environment, posing risks that current regulations underaddress. This is directly relevant to microplastic pollution research as it identifies plastic recycling itself as an underappreciated source of secondary microplastic contamination.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.