We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Can lead content be measured by handheld X‐ray fluorescence spectroscopy to meet REACH regulation?
AI summary Read the abstract
Researchers evaluated whether handheld X-ray fluorescence (HHXRF) devices can reliably measure lead content in recycled rigid PVC to meet EU regulations, finding that both tested instruments measured lead concentrations within the 13% inaccuracy range required by IEC standards, making HHXRF a viable rapid-screening tool for compliance checks.
Abstract Lead compounds have long been the most commonly used stabilizers for PVC products, but they are classified as toxic to reproduction category 1A, and their use is restricted in Europe. To promote recycling, the European Union adopted Regulation (EU) 2023/923, which permits the use of recycled rigid PVC (PVC‐U) containing up to 1.5% w/w of lead in specific products. This study compares the results obtained from two different handheld X‐Ray Fluorescence (HHXRF) devices on samples with known composition, also considering the matrix effect. This kind of evaluation is still missing in the literature. The measurements from both HHXRF devices show that the lead content falls within the 13% of relative inaccuracy range specified for lead in IEC 62321‐3‐1:2013, the standard currently used for determining lead in electrotechnical products. To assess whether the matrix effect can influence the measurements, two samples were produced by altering only the content of titanium dioxide. The results from both instruments were not significantly different, considering the 13% inaccuracy. In conclusion, HHXRF could be an effective method to determine the lead concentration in its usual dosage in the PVC‐U matrix. In case of inconclusive results based on this range, it is recommended to analyze the sample with another, more accurate technique, such as ICP. Highlights Statistical evaluation of accuracy of lead in samples with known composition. Evaluation of significant excess legal concentration. Prove infringements with fast and massive checks.
More Papers Like This
Lead in plastics – Recycling of legacy material and appropriateness of current regulations
AI summary Read the abstract
Researchers measured lead (Pb) concentrations in a wide range of consumer and environmental plastics using X-ray fluorescence, finding that historical products like old toys and construction plastics still contain dangerously high lead levels that can spread into newer products when recycled. The findings show that plastic recycling can unintentionally redistribute toxic heavy metals into everyday consumer goods.
In situ elemental characterisation of marine microplastics by portable XRF
AI summary Read the abstract
A portable X-ray fluorescence device was tested for its ability to measure metal contaminants (including lead, chromium, and cadmium) in beached microplastic pellets without dissolving the samples. This field-deployable technique could speed up monitoring of chemical contamination in coastal plastic debris.
Quantitative Analysis of Trace Elements in Microplastics Using Transportable XRF Spectrometer
AI summary Read the abstract
Researchers developed a quantitative method for analyzing trace elements -- chromium, iron, cobalt, copper, zinc, bromine, and lead -- in microplastics using a transportable X-ray fluorescence spectrometer with polyester calibration standards. Correction equations were applied to account for sample thickness and size effects, though analytical errors were larger for smaller 2 mm diameter microplastic samples.
Comparison of Various Plastics Wastes Using X-ray Fluorescence
AI summary Read the abstract
This study used X-ray fluorescence analysis to compare the elemental composition of different types of plastic waste, finding characteristic elemental profiles that could help sort plastics by resin type for recycling. Improved sorting of plastic waste is important for increasing recycling rates and reducing the fraction that ends up as environmental microplastic contamination.
UV-Irradiation Facilitating Pb Release from Recycled PVC Microplastics
AI summary Read the abstract
Researchers found that UV light exposure causes microplastics made from recycled PVC to release lead (Pb), a toxic heavy metal used as a stabilizer in older PVC formulations. This shows that environmental weathering of plastic pollution can release hazardous chemical additives into water and soil.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.