We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Design and Fabrication of a Locally Made Plastic Shredder
AI summary Read the abstract
Researchers designed and fabricated a low-cost, locally made plastic shredder to address plastic waste management in resource-limited settings, achieving 83% shredding efficiency and a capacity of 0.21 kg/hr using locally available materials. The project demonstrates that affordable, community-scale shredders can support sustainable plastic recycling and environmental protection.
Plastic waste management is a growing environmental concern due to the increasing production and disposal of plastic materials, which contribute to pollution and ecological degradation. Conventional plastic shredders are often expensive and inaccessible to small-scale recyclers, necessitating the development of cost-effective and locally fabricated alternatives. The project focuses on designing and fabricating a locally made plastic shredder that addresses plastic waste management challenges. The methodology involved a series of steps including needs assessment, literature review, conceptual and detailed design, material selection, fabrication, assembly, testing, and optimization. The shredder was designed to be cost-effective and efficient, utilizing locally available materials and expertise. Materials used included Aluminium and steel alloys for the frame, copper wire for the motor, high-quality bearings, rubber seals, and various electrical components. Tools employed in the fabrication process ranged from hand tools and power tools to welding equipment and testing instruments. Safety gear was also emphasized to protect workers during the fabrication and operation processes. The testing phase covered functional testing, load testing, efficiency testing, safety assessments, durability testing, environmental testing, and quality control inspections. Design calculations focused on parameters such as shredding capacity, torque, shear force, blade design, hopper volume, material feed rate, structural integrity, energy consumption, and shredder efficiency. Results indicated that the locally made plastic shredder effectively shredded various types of plastic waste, with a satisfactory shredding capacity of 0.21 kg/hr and a shredder efficiency of 83.12%. The torque transmitted by the shaft was 62.50 Nm, and the shear force required to cut through plastic was 2843.5 N. The blade speed was calculated at 41.89 rads/sec, with a cutting speed of 4189 m/sec. The energy consumption of the shredder was 4.48 Kwh. The project concluded that locally made plastic shredders could significantly contribute to sustainable plastic waste management, resource conservation, and environmental protection.
More Papers Like This
Design of an Electro-Mechanical Shredding Machine for Emerging Technologies and Investment Opportunities in Plastic Recycling Technology
AI summary Read the abstract
Researchers designed a machine that shreds plastic waste (PET, HDPE, PP) at 100 kg per hour, using a 7.5 horsepower electric motor, as a step toward recycling. The paper includes design drawings, material choices and cost estimates, and recommends building and testing a physical prototype to confirm the design works safely and effectively.
Promoting Circular Economy Around Plastic Waste: A New Design of Recycled Plastic Shredder
AI summary Read the abstract
Researchers designed and built a plastic shredder for the MAREA Plastic project to support circular economy goals, creating a university–community bridge for recovering and processing waste plastic into recyclable material at a local scale.
Development of Plastic Shredder Technology to Support Plastic Waste Reduction
AI summary Read the abstract
Researchers in Indonesia designed and tested an improved plastic shredder machine using specialized rotating blade technology to produce high-precision plastic flakes, aiming to address the country's severe plastic waste crisis that generates approximately 17 million tons of plastic waste annually with only 66% currently recycled.
Justification of the Selection and Experimental Study of a Shredder for Grinding PETG Plastic Waste Generated During 3D Printing
AI summary Read the abstract
Researchers designed a small shredding machine that breaks down leftover PETG plastic (a common 3D-printing material) into tiny, uniform pieces that can be melted down and reused to print new objects, instead of being thrown away. This matters because it offers a practical way to recycle plastic waste locally, cutting down on landfill trash and the resources needed to make new plastic—though the study focused on the recycling equipment itself, not on health effects like microplastic exposure.
Development of an IoT-Based Mobile Plastic Shredder for Optimized Waste Management in Batam
AI summary Read the abstract
Researchers designed and built an IoT-based mobile plastic shredding machine controlled by an Arduino microcontroller and monitored via a smartphone app, demonstrating consistent shredding performance with real-time weight sensing and remote control capabilities to improve plastic waste collection efficiency in underserved areas like coastal Batam, Indonesia.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.