0
Article Sign in to save

Micro(nano)plastics in Size-Segregated Atmospheric Particles in Eskişehir, Türkiye: Optimization of Sampling Parameters

Environmental Technology and Science Journal 2025 3 citations

AI summary Read the abstract

Researchers optimized size-fractionated sampling of airborne micro(nano)plastics in Eskişehir, Turkey using a cascade impactor, determining 40 cfm over 8 hours as optimal parameters, and found concentrations up to 1,631 MP/m³ in some size fractions — with over 90% identified as carbon black likely from tire and road wear.

Polymers
Body Systems

Abstract Inhalable micro(nano)plastics (MNPs < 10 μm) are ubiquitous emerging environmental pollutants that can enter the human respiratory tract and adversely affect respiratory health. A standardized methodology for the characterization of airborne MNPs is required, but one has yet to be established. To this end, a high-volume sampler with a five-stage cascade impactor was used to collect suspended particles and characterize MNPs. Following preliminary sampling at 40 cfm over a 24-h period, a notable accumulation of particles in descending cut-off sizes and agglomerated forms was observed. Subsequently, the size-fractionated sampling parameters were evaluated, including flow rate (20 and 40 cfm) and sampling duration (4, 8, 12, and 24 h), as the detection by spectrometric analysis was not feasible. The optimal sampling parameters were determined to be 40 cfm over eight hours through µ-Raman analysis. The MNPs were observed to comprise fragments and fibers, with a concentration of 434 MP/m 3 in stage 1, 431 MP/m 3 in stage 2, 1631 MP/m 3 in stage 3, 1117 MP/m 3 in stage 4, and 355 MP/m 3 in stage 5. The results of the spectrometric analysis indicated that over 90% of the MPs were carbon black, with the rest being polytetrafluoroethylene and polypropylene. This suggests that the majority of inhalable MPs were derived from tire and road wear. It is recommended that future studies examine the correlation between the concentration of suspended particles, the duration of sampling, and the amount of airborne MPs. Graphical Abstract

More Papers Like This

Article

Composition, interactions and resulting inhalation risk of micro- and nano-plastics in urban air

AI summary Read the abstract

This study characterized airborne micro- and nano-plastics in size-fractionated particulate matter collected in Leipzig, Germany, using pyrolysis gas chromatography mass spectrometry, finding average concentrations of 0.6 µg/m³ with tire wear particles dominating at approximately 65% of total plastics. Exposure and risk assessment indicated that inhaling approximately 2.1 µg of airborne plastic particles daily may increase cardiopulmonary mortality by 9% and lung cancer mortality by 13%, emphasizing the need for global policy action.

Article Tier 2

Micro- and nano-plastics (MNPs) in urban air: polymer composition, interactions and inhalation risk

AI summary Read the abstract

Researchers characterized airborne micro- and nanoplastics in urban air using pyrolysis gas chromatography-mass spectrometry on size-fractionated aerosol samples. The study found total concentrations averaging 0.6 micrograms per cubic meter, with tire wear particles as a dominant source, highlighting an underestimated threat to urban air quality and human respiratory health.

Article Tier 2

Survey on the concentration and characterization of microplastics in the ambient air around the landfill and assessing the exposure of surrounding residents at different distances

AI summary Read the abstract

Researchers measured tiny plastic particles floating in the air near a landfill in Iran and found that people living within 5 km (about 3 miles) breathe in more of these microplastics than those living farther away. The plastic bits—mostly fragments and fibers from common plastics like polypropylene and PVC—were small enough to potentially be inhaled deep into the lungs, though scientists still don't fully know what health effects this exposure causes. If you live near a landfill, this study suggests it's worth paying attention to as researchers learn more about how breathing in plastic particles might affect our health.

Article Tier 2

Insight into the size-resolved markers and eco-health significance of microplastics from typical sources in northwest China

AI summary Read the abstract

Researchers characterized airborne microplastics and plasticizers emitted from five common sources in northwest China—plastic burning, fruit bag burning, road traffic, agricultural film, and livestock breeding—finding source-specific polymer and chemical profiles in PM2.5 and PM10 fractions.

Article Tier 2

On airborne tire wear particles along roads with different traffic characteristics using passive sampling and optical microscopy, single particle SEM/EDX, and µ-ATR-FTIR analyses

AI summary Read the abstract

Researchers used passive sampling and advanced analytical techniques including SEM/EDX and micro-ATR-FTIR to characterize airborne tire wear particles along roads with different traffic volumes and speeds. The study found that tire wear particles, a major category of microplastic pollution, varied in concentration and composition depending on traffic characteristics, highlighting roadways as a significant source of airborne microplastic contamination.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper