0
Article Sign in to save

Adsorptive Removal of Cd(II) Ions using Core-Shell Polystyrene@NiFeAl-LDH Nanocomposite: Optimization, Isotherm, and Kinetics Study

AI summary Read the abstract

Researchers synthesized a core-shell nanocomposite of polystyrene-coated NiFeAl layered double hydroxide and evaluated its ability to adsorb cadmium ions from water, optimizing conditions through isotherm and kinetic modeling. The material achieved high removal efficiency, suggesting potential for low-cost heavy metal remediation using recovered polystyrene waste.

Polymers
Body Systems

In this study, a core-shell nanocomposite was successfully prepared using NiAlFe-LDH as a core coated with polystyrene (PS) nanoparticles with an LDH:PS ratio of 3:1 (PS @NiAlFe-LDH) for the removal of cadmium (Cd2+) from aqueous solutions. PS nanospheres were prepared from styrene monomer recovered from Styrofoam waste. The prepared PS@NiAlFe-LDH was characterized for its structural morphology, elemental composition, surface area, and pore morphology. Results indicated the successful formation of PS nanosphers core coated by platelet LDH shell and a successful adsorption of Cd2+ ions. The maximum adsorption efficiency (95.53%) was achieved under the optimal conditions: pH of 6, PS@NiAlFe-LDH dosage of 0.15 g/100 mL, shaking speed of 200 rpm, and an initial Cd2+ concentration of 100 mg/L at a 90-minute contact time. Langmuir isotherm model was the most accurate in describing the adsorption process with a maximum adsorption capacity of 227.273 mg/g. The pseudo-second-order (PSO) kinetics model described the adsorption behaviour of cadmium ions on PS@NiAlFe-LDH surface as the calculated values from the model were close to the experimental values. The adsorption mechanism was a combination of electrostatic attraction, surface complexation/ion exchange and internal diffusion within the pores. PS@NiAlFe-LDH demonstrated significant reusability, with an efficiency of 57.56% after six regeneration cycles. In conclusion, this study indicates that PS@NiAlFe-LDH nanocomposite exhibits high quality and excellent efficiency in removing cadmium ions from aqueous solutions, owing to its porosity and abundance of active groups on its surface, as well as structural stability after adsorption, which makes it a promising material for environmental remediation applications. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

More Papers Like This

Article Tier 2

Adsorption mechanism of cadmium on polystyrene microplastics containing hexabromocyclododecane

AI summary Read the abstract

Researchers found that polystyrene microplastics containing hexabromocyclododecane (PS-HBCD) adsorb cadmium via electrostatic attraction and surface complexation, with pH, salinity, and particle size all influencing adsorption capacity.

Article Tier 2

Kinetics and isotherm of cadmium adsorption onto polyethylene microbeads in artificial seawater

AI summary Read the abstract

Researchers studied how cadmium adsorbs onto low-density polyethylene microbeads in artificial seawater, finding that plastic microbeads can concentrate this toxic heavy metal from solution. This supports the concern that microplastics act as vectors for heavy metal contamination in marine environments.

Article

Material Properties, Characterization, and Application of Microcellular Injection-Molded Polypropylene Reinforced with Oyster Shells for Pb (II) Adsorption Kinetics from Aqueous Solutions

AI summary Read the abstract

This review covers the material properties of microplastics, including size, shape, polymer composition, and surface chemistry, alongside the analytical methods used to characterize them. The paper also discusses how these physical and chemical properties influence microplastic behavior in environmental and biological research contexts. It serves as a practical reference for standardizing microplastic characterization across studies.

Article

In Situ Growth of MIL-100(Fe) on Coconut Shell Activated Carbon for High-Efficiently Removal of Microplastics from Water

AI summary Read the abstract

This study fabricated a composite adsorbent (CSAC@MIL-100(Fe)) by growing MIL-100(Fe) metal-organic framework onto coconut shell activated carbon, achieving 97.4% removal efficiency for polystyrene microplastics from water. The material maintained 91.44% removal efficiency after seven regeneration cycles across a broad pH range, with adsorption governed by π-π interactions, electrostatic attraction, and coordination effects reaching a Langmuir maximum capacity of 746.27 mg/g.

Article Tier 2

Adsorption Performance and Mechanism of Naturally Aged Polyethylene(PE) Microplastics on Cadmium Ions (Cd2+) in Water

AI summary Read the abstract

River-aged polyethylene microplastics showed increased surface roughness, altered functional groups, and enhanced adsorption capacity for cadmium ions compared to pristine particles, with aging duration influencing both the kinetics and isotherms of metal binding. These results confirm that environmental weathering transforms microplastics into more effective heavy metal carriers, increasing the risk of combined plastic-metal toxicity in aquatic ecosystems and food chains.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper