We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Photo-initiated solvent-mediated depolymerization of consumer poly(methyl methacrylate) without chlorinated reagents
Summary
UV illumination of PMMA in aromatic solvents at 120–180°C achieves over 95% conversion with more than 70% monomer recovery, demonstrating a low-temperature chemical recycling route that does not require chlorinated reagents. This scalable depolymerization method offers a practical pathway to close the loop on acrylic plastic waste, a major contributor to microplastic pollution.
The chemical recycling of commodity acrylic polymers, such as the transparent thermoplastic polymethyl methacrylate (PMMA), typically requires temperatures of 350-400°C. Herein, we report chemical recycling back to monomers for PMMA between 120-180°C, through UV illumination under oxygen-free conditions. We have achieved gram-scale degradation of consumer plastic with >95% conversion, yielding >70% monomer, which can be readily repolymerized. The process proceeds even at high concentrations (>1 M) and depends strongly on solvent choice: aromatic solvents like dichlorobenzene and diphenyl ether maximize conversion. In contrast to a concurrently published study, we report that chlorine radicals are not required for depolymerization; however, when present, they react with the unzipping chain to form chlorine-functionalized PMMA which can be upcycled through derivatization. In more sustainable non-chlorinated solvents such as benzonitrile, minimal termination by radicals enables complete unzipping. These findings demonstrate a low-temperature, scalable route for the chemical recycling of PMMA, offering alternative pathways for plastic circularity.