We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Energy-efficient cellulose acetate nanofilms from hemp hurds for circular packaging and agricultural mulch applications
AI summary Read the abstract
Cellulose acetate nanofilms produced from industrial hemp hurds required 81% less energy to manufacture than unmodified cellulose films and demonstrated strong oxygen, oil, and moisture barrier properties suitable for packaging and agricultural mulch. Developing high-performance biodegradable alternatives to single-use plastic films directly targets a major source of microplastic contamination in agricultural soils and marine environments.
Abstract This study uniquely demonstrates the valorization of industrial hemp hurds into energy-efficient cellulose acetate (CA) nanofilms tailored for both sustainable packaging and agricultural mulching applications, a dual-purpose approach to address the growing global concern over single-use plastic pollution. The degree of substitution (DS) of CA was tailored by adjusting the soaking time of hurd cellulose in glacial acetic acid. Following acetylation, the resulting CA fibers underwent mechanical nanofibrillation through friction grinding using a Masuko grinder to produce cellulose acetate nanofibers (CAN). Acetylation significantly reduced this energy demand, resulting in up to 81.4% lower energy being required for nanofibril formation compared to unmodified cellulose. The nanofibers were then cast into CAN films via solution casting. The obtained CA fibers were then characterized by using time-of-flight secondary ion mass spectrometry (ToF–SIMS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) to evaluate structure, thermal behavior, and morphology. Mechanical and barrier properties of the CAN films were assessed against oxygen, moisture, water, oil, and grease to determine their suitability for high-value packaging and agricultural applications. The films showed excellent oxygen resistance (11.8–60.1 mL/m 2 ·day), high oil and grease resistance (Kit 12), and minimal hot oil absorption (≤ 0.75%). Improved dry (46.17–62.83 Nm/g) and wet (2.19–14.77 Nm/g) tensile strength, reduced water absorption (0.84–6.74%), and 38.63% lower WVTR were also observed. Compared to plastic mulch films, the acetylated films demonstrated excellent moisture retention, promoting seed germination and faster growth rates in preliminary controlled tests. These sustainable films offer a viable alternative to fossil-based plastics, ultimately contributing to food security and a circular economy. Graphical abstract
More Papers Like This
Development of Cellulose Nanofiber Based Nanopapers as Sustainable Alternatives to Plastic Derived Industrial Materials
AI summary Read the abstract
Cellulose nanofiber (CNF) nanopapers derived from renewable biomass were shown through numerical simulations to match the mechanical and barrier performance of synthetic polymer films while substantially reducing environmental footprint and eliminating microplastic shedding. This scalable platform positions biodegradable CNF materials as direct substitutes for petroleum-based plastics in packaging, filtration, and electronics applications, targeting microplastic pollution at the source.
Utilization of Disposable Paper Cups for Production of Cellulose Acetate Based Film
AI summary Read the abstract
Researchers investigated the conversion of disposable paper cups -- a common food service waste stream with a polyethylene plastic lining -- into cellulose acetate film as a sustainable alternative to conventional plastic films. The study characterized the resulting biopolymer film for its properties and evaluated the approach as a strategy for valorizing paper cup waste.
Recovery of Cellulose Acetate from Spent Cigarette Filters by Green Solvents for Production of Polymer Films
AI summary Read the abstract
Researchers developed a sustainable method for recovering cellulose acetate from spent cigarette filters — a persistent microplastic and chemical pollution source — using green solvents including deionised water, sodium chloride solutions, and ethanol under varying temperature and concentration conditions. They found that 75% ethanol was most effective for recovery, and characterised the purified material by FT-IR, TGA-DSC, NMR, and FESEM for use in producing new polymer films.
Biodegradable Polymer Nanocomposites from Agricultural Waste for Sustainable Packaging Applications
AI summary Read the abstract
Biodegradable polymer nanocomposites made from agricultural waste fillers showed a 32% increase in tensile strength, improved water vapor barrier performance, and 85% degradation in soil within 90 days — far outpacing conventional plastics. These results demonstrate a viable sustainable alternative to petroleum-based packaging, directly addressing the 400 million tons of plastic waste generated annually.
Recovery of cellulose nanocrystal from mixed office wastepaper and the development of bio-based coating matrixes with enhanced water, gas, oil, and grease resistances for packaging
AI summary Read the abstract
Researchers designed multifunctional reinforced bioplastics by integrating complementary additives to simultaneously improve mechanical strength, biodegradation rate, and functional properties, demonstrating that trade-offs between durability and end-of-life degradability can be overcome through synergistic material design.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.