We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Reducing carbon footprint through binder content optimization in durable performance-based concrete overlays
Summary
This study tested new concrete mixes for bridge repairs that use less cement (a major source of carbon pollution) while making stronger, longer-lasting structures. The researchers found that using alternative cement types and additives like fly ash created concrete that resists cracking and blocks harmful chemicals by up to 52% better than regular concrete. This matters because stronger bridges last longer and need fewer repairs, reducing both environmental damage and the costs taxpayers pay for infrastructure maintenance.
Abstract Common failure mechanisms in bridge deck overlays include early-age cracking, chloride ingress, and degradation from harsh environmental conditions. To address these issues, performance-based, durable, and sustainable concrete mixtures are needed. This study evaluated eight concrete overlay mixtures designed to improve durability, reduce early-age cracking, and extend the service life of bridge deck overlays in Texas, while also reducing cement and water demand. The mixtures incorporated three cement types, ordinary portland cement (OPC), portland limestone cement (PLC), and calcium sulfoaluminate cement (CSA), combined with supplementary materials such as fly ash, silica fume, latex, and polymer additives. Aggregate structure optimization was performed using the Power 45 and Tarantula methods to minimize paste content and enhance packing density. Fresh and hardened properties of the mixtures were assessed at multiple ages. Key findings show that CSA cement mixtures achieved the fastest initial setting (3.5 h), and the highest early-age compressive strength (45.2 MPa at 7 days). The addition of latex delayed the setting time by only 0.5 h but significantly improved tensile strength by up to 18%. PLC cement mixtures containing fly ash exhibited improved workability (slump increase from 75 to 110 mm) and extended setting times by 2–3 h, while combining fly ash with silica fume refined the pore structure and reduced chloride migration by up to 52% compared to control OPC mixtures. CSA-polymer mixtures demonstrated the highest durability, achieving a 56-day surface resistivity increase of 186.8% and the lowest chloride migration coefficient (2.42 × 10⁻ 10 m2/s) compared to conventional OPC mixtures.
Sign in to start a discussion.
More Papers Like This
Life Cycle Carbon Emissions Savings of Replacing Concrete with Recycled Polycarbonate and Sand Composite
Researchers conducted a life cycle assessment comparing recycled polycarbonate-sand composites to conventional concrete, finding significant reductions in carbon emissions. The recycled composite achieved compressive strength of 71 megapascals, far exceeding typical concrete performance. The study suggests that replacing concrete with recycled plastic composites in construction could simultaneously address plastic waste and reduce the carbon footprint of the built environment.
Carbon sequestration and environmental impacts in ternary blended cements using dyeing sludge and papermaking sludge
Not relevant to microplastics — this study investigates blending papermaking sludge and dyeing sludge ash into cement to reduce heavy metal leaching, improve mechanical properties, and enhance CO2 sequestration compared to conventional Portland cement.
Unlocking the Potential of Biomass Fly Ash: Exploring Its Application in Geopolymeric Materials and a Comparative Case Study of BFA-Based Geopolymeric Concrete against Conventional Concrete
This review examines biomass fly ash (BFA) as a raw material for geopolymer concrete production, comparing its carbon footprint and cost against conventional Portland cement concrete. Using BFA as a supplementary cementitious material offers a promising pathway for reducing cement's high CO2 emissions while utilizing an industrial by-product.
Utilization of plastic waste as replacement of natural aggregates in sustainable concrete: effects on mechanical and durability properties
Researchers tested concrete made with recycled polyethylene and PET plastic aggregates substituted for natural sand and gravel, finding that while plastic additions reduced compressive strength and increased water permeability, they improved impact resistance and chloride resistance, with PET concrete showing no microplastic leaching.
Enhancing High-Performance Concrete with Waste Rubber Tyre Aggregates: A Sustainable Approach
Researchers investigated the mechanical properties and sustainability performance of high-performance concrete incorporating waste rubber tyre aggregates, finding that rubber additions improve toughness and reduce environmental impact while meeting structural performance requirements.