We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics pollution - a qualitative material flow analysis
Summary
This study used material flow analysis to quantify microplastic pollution entering German water bodies from various sources including cosmetics, clothing, and rubber abrasion, finding that each source contributes differently to overall contamination. The analysis helps prioritize which plastic sources should be targeted to reduce microplastic emissions most effectively.
The quantity of plastic released into the environment has grown considerably in the past decades. Small plastic fragments, found in cosmetics or resulted from friction and abrasion may percolate through the sludge of wastewater treatment plants and subsequently enter the hydrosphere. While the effects of plastic pollution on animals are becoming more evident, it is uncertain if the human health is affected by this phenomenon. In order to apply a precautionary approach, it is necessary to limit the quantity of such pollutants. It is therefore of utmost importance to identify the main direct and indirect sources. Also, a quantification would also be beneficial in order to classify these pollutants. The literature confirms that microplastics may reside in the environment for very long periods of time. Using the STAN2 software, this study designed a Material Flow Analysis that illustrates the main pathways of microplastics. Thus, from source to sink, they can enter the biofuel plants and later enter the pedosphere if the digestate or the sewage sludge is used as fertilizer. The lighter particles may become airborne or can be washed by water overflow. Lastly, most of the microplastics are discharged into the hydrosphere. Even the most performant wastewater treatment plants are unable to capture all the microplastics. In regions where no water treatment is in place, these particles can directly enter the oceans. They can be accidentally ingested by biota. Significant quantities of microplastics were also found in food sources. Using data from international statistics, this thesis quantified the potential amount of microplastics ingested by a human during one year. More than 5800 microplastics may be ingested by one individual from beer, honey, sea salt and seafood only. Around 99% of this amount is excreted. In conclusion, humans may actively contribute not only to an increase in the amount of microplastics, but they also contribute to a recirculation of the particles found in food.
Sign in to start a discussion.
More Papers Like This
Microplastic Types in the Wastewater System—A Comparison of Material Flow-Based Source Estimates and the Measurement-Based Load to a Wastewater Treatment Plant
This study compared model-based estimates of microplastic sources in wastewater with actual measurements at a treatment plant, finding that synthetic textiles were the dominant source of microplastic fibers. The results help prioritize which pollution sources to address first in efforts to reduce microplastics entering waterways from sewage treatment.
Using information flow analysis to establish key data gaps in the assessment of marine microplastic pollution
This study applied information flow analysis to identify critical data gaps in marine microplastic risk assessment and life cycle impact assessment, then developed a material flow analysis for Norway demonstrating that rubber-derived particles dominate both estimated emissions (85–96%) and mussel tissue burdens (93%), highlighting source characterization as a priority for closing assessment gaps.
Material flow analysis-based assessment of polypropylene-fiber-containing microplastics released from disposable masks: Characterizing distribution in the environmental media
Researchers used material flow analysis to track where polypropylene microplastics from discarded disposable face masks end up in the environment. They found that the vast majority of mask-derived microplastics accumulate in landfills and soil, with smaller amounts reaching water systems. The study quantifies how the pandemic-driven surge in mask use has created a new and measurable source of microplastic pollution.
Polymer-Specific Modeling of the Environmental Emissions of Seven Commodity Plastics As Macro- and Microplastics
A polymer-specific material flow model estimated the environmental emissions of seven major commodity plastics as both macro- and microplastics into aquatic and terrestrial ecosystems, finding significant differences in emission pathways by plastic type. The model highlights that understanding polymer-specific behavior is essential for accurate pollution estimates and effective mitigation strategies.
Probabilistic material flow analysis and emissions modeling for five commodity plastics (PUR, ABS, PA, PC, and PMMA) as macroplastics and microplastics✰
Researchers developed probabilistic material flow models for five engineering plastics (PUR, ABS, PA, PC, PMMA) tracking their flows from production through use to environmental release, providing quantitative estimates of microplastic emissions to air, water, and soil across Europe.