We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst
Summary
Carbon nanotubes were successfully synthesized from polypropylene plastic waste using a simple reactor, turning plastic waste into a high-value nanomaterial. This approach could provide an economically attractive way to deal with plastic waste while creating useful materials.
The disposal of non-biodegradable plastic waste without further upgrading/downgrading is not environmentally acceptable and many methods to overcome the problem have been proposed. Herein we indicate a simple method to make high-value nanomaterials from plastic waste as a partial solution to the environmental problem. Laboratory-based waste centrifuge tubes made of polypropylene were chosen as a carbon source to show the process principle. In the process, multi-walled carbon nanotubes (MWCNTs) were synthesized from plastic waste in a two-stage stainless steel 316 (SS 316) metal tube that acted as both reactor vessel and catalyst. The steel reactor contains Fe (and Ni, and various alloys), which act as the catalyst for the carbon conversion process. The reaction and products were studied using electron probe microanalysis, thermogravimetric analysis, Raman spectroscopy and transmission electron microscopy and scanning electron microscopy. Optimization studies to determine the effect of different parameters on the process showed that the highest yield and most graphitized MWCNTs were formed at 900 °C under the reaction conditions used (yield 42%; Raman ID/IG ratio = 0.48). The high quality and high yield of the MWCNTs that were produced in a flow reactor from plastic waste using a two stage SS 316 chemical vapor deposition (CVD) furnace did not require the use of an added catalyst.
Sign in to start a discussion.
More Papers Like This
Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst
Researchers developed a method to produce high-quality carbon nanotubes from waste polyethylene plastics using iron-nickel catalysts. The study found that varying the catalyst composition affected nanotube quality and yield, demonstrating a promising approach for converting plastic waste into valuable nanomaterials rather than allowing it to persist as pollution.
Upcycling Waste Plastics into Multi-Walled Carbon Nanotube Composites via NiCo2O4 Catalytic Pyrolysis
Researchers used catalytic pyrolysis — heating plastic waste with metal catalysts — to convert post-consumer plastics into carbon nanotube composites, a high-value industrial material. Bimetallic nickel-cobalt catalysts produced the best results. This approach could help valorize plastic waste while reducing the volumes that end up in the environment as microplastic pollution.
Carbon nanotubes production from real-world waste plastics and the pyrolysis behaviour
Researchers produced carbon nanotubes from real-world waste plastics through pyrolysis, characterizing the thermal decomposition behavior of mixed plastic waste and demonstrating a valuable upcycling pathway for plastic pollution.
Plastic-derived substrate-grown carbon nanotubes as freestanding electrode for hydrogen evolution in alkaline media
Plastic waste was converted into carbon nanotubes via pyrolysis and used as a high-performance electrode for hydrogen production, demonstrating a circular economy pathway that transforms plastic pollution into a clean energy material.
Hydrogen and Carbon Nanotubes from Pyrolysis-Catalysis of Waste Plastics: A Review
This review examines how pyrolysis of waste plastics coupled with steam reforming or catalytic processes can produce hydrogen gas and high-quality carbon nanotubes, covering different reactor designs and catalyst types. The work highlights waste plastics as a potentially valuable feedstock for generating both clean energy and advanced carbon materials.