We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Quantitative analysis of microplastics in wastewater from treatment plant by visual identification and FT-IR imaging using H2O2 and FeSO4: A case study
AI summary Read the abstract
Researchers developed and validated a visual spectroscopy method for quantifying microplastics in wastewater treatment plant effluent, offering a faster alternative to conventional manual microscopy. The approach is suitable for routine monitoring of microplastic concentrations passing through wastewater treatment.
Abstract Plastic is a commonly used and perhaps unavoidablematerial due to its multifaceted nature. Plastic wastes do not degrade easily and hence present as a major threat to environment. Plastics of particle size less than 5mm is universally considered as microplastics. The present study investigates the identification and identification and quantification of microplastics. The sample was collected from the wastewater treatment plant of the Kalasalingam University campus as a bulk sample. The sample was prepared using Hydrogen peroxide and Iron II sulfate to oxidize the organic matter. Filtration was carried out in a set of filetr papers arranged in series with decreasing pore size. Sediments were collected and analyzed using FTIR imaging, The surface of the paper was analyzed using 40X dissecting microscope for visual identification. Further, SEM analysis with EDS mapping was performed to study the material composition. Eight different types of microplastics (MPs) were identified and sizes measured. The particle size varied from 10 -20 micron.
More Papers Like This
Quantification of microplastic mass and removal rates at wastewater treatment plants applying Focal Plane Array (FPA)-based Fourier Transform Infrared (FT-IR) imaging
AI summary Read the abstract
This study quantified microplastic mass and calculated removal rates at wastewater treatment plants, finding that while plants remove a large proportion of incoming microplastics, the residual discharge still represents a substantial ongoing input to receiving water bodies.
Microplastic Monitoring at Different Stages in a Wastewater Treatment Plant Using Reflectance Micro-FTIR Imaging
AI summary Read the abstract
Researchers used reflectance micro-FTIR imaging to monitor microplastic presence at multiple treatment stages within a wastewater treatment plant, addressing the challenge of analyzing MPs in biogenic organic matter-rich matrices. The study mapped how microplastic identity, abundance, and size distribution changed through primary and secondary treatment, providing insight into WWTP contributions to aquatic microplastic pollution.
Detection of microplastic traces in four different types of municipal wastewater treatment plants through FT-IR and TED-GC-MS
AI summary Read the abstract
Researchers detected microplastic traces in four different types of municipal wastewater treatment plants using FT-IR and TED-GC-MS, finding that while treatment processes removed most microplastics, some were still released into receiving water bodies.
IR microspectroscopic identification of microplastics in municipal wastewater treatment plants
AI summary Read the abstract
Researchers used infrared microspectroscopy to identify microplastics at three municipal wastewater treatment plants in Thailand employing different treatment processes, finding varied levels of microplastic contamination tied to urbanization level and treatment technology.
Identification and Quantification of Microplastics in Wastewater Using Focal Plane Array-Based Reflectance Micro-FT-IR Imaging
AI summary Read the abstract
Researchers applied focal plane array FT-IR imaging to identify and quantify microplastics in wastewater samples, demonstrating that this method provides efficient and detailed polymer characterization across large sample areas.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.