We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
[Effects of Microplastics on Membrane Fouling During a Shortened Ultrafiltration Membrane Process].
AI summary Read the abstract
This study investigated how microplastics in freshwater affect membrane fouling during ultrafiltration — a common drinking water treatment step — finding that their presence can compromise filter performance and potentially allows microplastics to pass into treated water supplies.
Microplastics have garnered much attention worldwide as a new emerging pollutant. As they are gradually detected in freshwaters, understanding how microplastics will behave during current drinking water treatment processes is urgently needed. In recent years, the shortened process with an ultrafiltration (UF) membrane has shown excellent performance because of its low land use and high water purification efficiency. In this work, the membrane performance induced by microplastics was investigated with a shortened UF membrane process. The results showed that membrane fouling was always induced by the cake layer before and after coagulating with microplastics. Owing to the small UF membrane pore size (d<0.1 μm), slight membrane fouling was caused by microplastics (d<5 mm) alone. However, although the loose cake layer was formed because of the existence of flocs, the cyberspace formed by flocs was easily entered by small microplastics with increasing coagulant dosage. As a result, server membrane fouling was induced because of the formation of a dense cake layer. It was shown that the specific membrane flux induced by flocs alone was 0.82 and 0.76 in the presence of 0.1 mmol·L-1 and 0.9 mmol·L-1 FeCl3·6H2O, respectively. However, after coagulation the specific membrane fouling induced by the 0.1 g small microplastics (d<0.5 mm) was 0.76 and 0.62 with 0.1 mmol·L-1 and 0.9 mmol·L-1 FeCl3·6H2O, respectively. In addition, microplastics were always negatively charged in water. In comparison with alkaline conditions, Fe-based flocs were positively charged under acidic conditions, which were also much smaller. Therefore, microplastics were more easily adsorbed by Fe-based flocs under acidic conditions, leading to severe membrane fouling because of the dense cake layer formed. After coagulating with 0.3 mmol·L-1 FeCl3·6H2O, the specific membrane flux induced by 0.1 g small microplastics (d<0.5 mm) was 0.55 and 0.79 at pH 6.0 and 8.0, respectively.
More Papers Like This
Fate and Behavior of Microplastics in Ultrafiltration Membrane Systems for Water Treatment: Fouling, Releasing, and Organic Leaching
AI summary Read the abstract
Researchers investigated the fate and behavior of microplastics in ultrafiltration membrane systems used for water treatment, examining three key phenomena: membrane fouling caused by microplastic deposition, release of microplastics through membrane failure or bypass, and leaching of organic additives from microplastics. The work provides mechanistic understanding of how microplastics interact with ultrafiltration systems in drinking water treatment contexts.
An assessment of the impact of structure and type of microplastics on ultrafiltration technology for microplastic remediation
AI summary Read the abstract
Researchers assessed ultrafiltration technology for microplastic removal from water, finding that membrane performance varied based on microplastic structure, size, and polymer type, with implications for optimizing tertiary treatment in water purification systems.
Membrane fouling characteristics and mechanisms in coagulation-ultrafiltration process for treating microplastic-containing water
AI summary Read the abstract
This study investigated how microplastics affect membrane fouling during a common water treatment process that combines coagulation with ultrafiltration. Researchers found that while microplastics initially worsen membrane fouling, adding the right amount of coagulant can actually turn the plastics into an advantage by creating a looser filter cake that improves water flow.
Analysis of membrane surface after the filtration of surface water containing microplastic
AI summary Read the abstract
Researchers tested ultrafiltration and nanofiltration membranes on real river water containing microplastics and found both membrane types completely removed plastic particles from the filtered water, though the deposited microplastics reduced water flow through the membranes over time — confirming membrane filtration as an effective but imperfect water treatment strategy.
Release of microplastics from polymeric ultrafiltration membrane system for drinking water treatment under different operating conditions
AI summary Read the abstract
Researchers discovered that the plastic membrane filters used to purify drinking water can actually release microplastics into the treated water. The particles came not just from the membrane itself but also from plastic equipment in the system, meaning that water treatment technology designed to remove contaminants may inadvertently be adding new plastic particles to our drinking water.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.