0
Article Tier 2 Sign in to save

Organic pollutants, nano- and microparticles in street sweeping road dust and washwater

Environment International 2019 85 citations

AI summary Read the abstract

Researchers analyzed road dust and washwater from street sweeping machines and found high concentrations of petroleum hydrocarbons, PAHs (cancer-linked compounds from combustion), and nanoparticles as small as 1 nanometer — with the highest pollutant loads occurring after a winter pause in sweeping. The findings show that while street sweeping effectively captures fine particles and associated pollutants, the contaminated washwater must be treated before disposal rather than released into stormwater systems.

Polymers

Road areas are pollution hotspots where many metals, organic pollutants (OPs) and nano/microparticles accumulate before being transported to receiving waters. Particles on roads originate from e.g. road, tyre and vehicle wear, winter road maintenance, soil erosion, and deposition. Street sweeping has the potential to be an effective and affordable practice to reduce the occurrence of road dust, and thereby the subsequent spreading of pollutants, but there is currently little knowledge regarding its effectiveness. In this paper we investigate the potential of street sweeping to reduce the amounts of OPs and nano/microparticles reaching stormwater, in a case study sampling road dust and washwater from a street sweeping machine, road dust before and after sweeping, and stormwater. The compound groups generally found in the highest concentrations in all matrices were aliphatics C5-C35 > phthalates > aromatics C8-C35 > PAH-16. The concentrations of aliphatics C16-C35 and PAHs in washwater were extremely high at ≤ 53,000 µg/L and ≤ 120 µg/L, respectively, and the highest concentrations were found after a 3-month winter break in sweeping. In general, fewer aliphatic and aromatic petroleum hydrocarbons and PAHs were detected in road dust samples than in washwater. The relative composition of the specific PAH-16 suggests tyre wear, vehicle exhausts, brake linings, motor oils and road surface wear as possible sources. The study indicates that many of the hydrophobic compounds quantified in washwater are attached to small particles or truly dissolved. The washwater contains a wide range of small particles, including nanoparticles in sizes from just below 1 nm up to 300 nm, with nanoparticles in the size range 25-300 nm present in the highest concentrations. The results also indicated agglomeration of nanoparticles in the washwater. The street sweeping collected a large amount of fine particles and associated pollutants, leading to the conclusion that washwater from street sweeping needs to be treated before disposal.

More Papers Like This

Article

Colloidal organic pollutants in road runoff : sources, emissions and effective treatment technologies

AI summary Read the abstract

This PhD thesis systematically investigated organic pollutants in urban road runoff, finding that PAHs, aliphates, and phthalates are transported in nano- and micro-sized emulsions (30–660 nm), and demonstrating that sorption filters using activated carbon, peat, or pine bark can achieve up to 100% removal of these colloidal contaminants from stormwater.

Article Tier 2

Traffic-related microplastic particles, metals, and organic pollutants in an urban area under reconstruction

AI summary Read the abstract

A study in a Gothenburg urban reconstruction area simultaneously measured microplastics, metals, and organic pollutants in road washwater, sweepsand, and stormwater, finding correlations among pollutant types and highlighting road runoff as a key pathway for co-transport to receiving waters.

Article Tier 2

Occurrence of tire and bitumen wear microplastics on urban streets and in sweepsand and washwater

AI summary Read the abstract

Tire tread wear and bitumen particles were the dominant anthropogenic microplastics found on urban roads and in sweeping waste and stormwater in a Norwegian study, with concentrations up to 2,561 particles per liter in road dust samples. Street sweeping removed significant quantities of these particles, and sodium iodide density separation proved effective for their analytical isolation.

Article Tier 2

Identification, classification and quantification of microplastics in road dust and stormwater

AI summary Read the abstract

Researchers identified and quantified microplastics in road dust and stormwater, finding significantly higher concentrations in industrial areas compared to residential zones, with tire wear particles and polyethylene fragments being the most common types.

Article Tier 2

Resuspension of microplastics and microrubbers in a semi-arid urban environment (Shiraz, Iran)

AI summary Read the abstract

Researchers quantified airborne microplastics and microrubbers in road dust across Shiraz, Iran, finding significant resuspension of particles up to 177 cm above road level, highlighting an underappreciated exposure pathway for urban populations.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper