We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Mask material: challenges and virucidal properties as an effective solution against coronavirus SARS-CoV-2
Summary
This review examines the filtration efficiency, breathability, and virucidal properties of different mask materials against SARS-CoV-2, finding that cotton mask performance improves with higher thread count and more layers but at a cost to breathability.
Abstract COVID-19 viruses are primarily transmitted between people via respiratory droplets generated from an infected person while coughing, sneezing, exhaling or close contact. Hence, the use of masks are part of prevention and control measures to limit the spread of COVID-19. A comprehensive study on various materials used in masks is required. The filtration efficiency of cotton masks increases with increase in thread count and number of layers, but breathability is affected and therefore a risk for longer durations. Cotton-based masks have filtration efficiency ranging from 5% to 80% depending on the number of layers. Combinations of different hybrid fabric materials and design have an efficiency ranging from 37% to 97%. Bio-cellulose, which is derived from cellulosic biomass by synthesis techniques involving various physical and chemical processes followed by refining techniques, possesses remarkable properties including biodegradability, biocompatibility, low toxicity, etc., making it the most suitable mask material. Masks made of bio-cellulose have an important property of hydrophilicity which makes it adhere to the face tightly, giving a cooling effect to the face. Use of nanocellulose masks can help attaining filtration efficiency up to 99.9980–99.9995% along with other desirable properties. Hence, there is an immediate need to address the issues and challenges of mask materials and work towards the design and development of low cost masks to overcome these shortcomings by the researchers and manufacturers.
Sign in to start a discussion.
More Papers Like This
Filtration Performance of Layering Masks and Face Coverings and the Reusability of Cotton Masks after Repeated Washing and Drying
Researchers tested the filtration efficiency of various face masks and found that layering a cloth mask over a surgical mask improved particle filtration by about 25%, and that cotton masks retained their filtration ability even after 52 wash-and-dry cycles. However, the study also observed that repeated washing gradually broke down cotton fibers into micro- and nano-scale fragments, raising a subtle concern about microfiber shedding from laundered cloth masks.
Aerosol Filtration Testing of Fabrics for Development of Reusable Face Masks
Researchers tested the aerosol filtration performance of over 300 fabrics and layered fabric combinations for use as reusable face masks, finding that layered materials and hydrophobic coatings significantly improve filtration efficiency while maintaining breathability. The work provides practical guidance for designing effective non-disposable masks — an important consideration given that disposable mask waste, including microplastic-releasing synthetic fibers, became a major pollution concern during the COVID-19 pandemic.
Viruses and Their Penetration Through Fibrous Structures: a Review
This review examines how viruses interact with and penetrate fibrous structures such as face masks and respirators, analyzing the filtration mechanisms and material properties that determine the protective efficacy of textile barriers against airborne viral transmission.
A Review of the Fabrication Methods, Testing, and Performance of Face Masks
This review covered the fabrication methods, filtration performance, comfort characteristics, and certification standards of face masks and respirators, with particular attention to developments during and after the COVID-19 pandemic. The authors identified trade-offs between filtration efficiency, breathability, and user comfort across different mask types and materials.
Evaluation of Fiber and Debris Release from Protective COVID-19 Mask Textiles and in Vitro Acute Cytotoxicity Effects.
Researchers quantified fiber and particle debris released from textile-based face masks and surgical masks during the COVID-19 pandemic using both liquid and air extraction methods, finding that cotton-based textiles released up to 29,452 fibers per gram under liquid extraction while synthetic textiles released up to 1,030 fibers per gram. The study assessed the potential for inhaled mask debris to cause acute cytotoxic effects, raising questions about respiratory health implications of prolonged mask wear.