We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A polymer-based technique to remove pollutants from soft contact lenses
AI summary Read the abstract
Researchers developed a new polymer-based technique using silicone (PDMS) to physically remove surface contaminants from soft contact lenses more effectively than conventional rinsing. The method is relevant to understanding how plastic surfaces interact with and retain environmental particles and contaminants.
PURPOSE: To demonstrate an alternative to the rinse and rub (RR) method for cleaning pollutants from the exterior surface of soft contact lenses. This proposed technique is termed Polymer on Polymer Pollutant Removal (PoPPR), which utilizes the elastic properties of polydimethylsiloxane (PDMS) to physically remove contaminants from contact lens surfaces through non-adhesive unpeeling. METHODS: Three different ratios of setting agent to polymer PDMS (1:30, 1:40, and 1:50) were evaluated using the PoPPR method against the control method of RR with a commercial multi-purpose lens cleaning solution. Three simulated pollutants of different sizes: pollen (25-40 μm), microbeads (1-5 μm), and nanoparticles (5-10 nm), were used to test the effectiveness of both cleaning methods. The fraction of pollutants removed from each contact lens was recorded and evaluated for significance. RESULTS: PDMS 1:40 was found to be the optimal ratio for lens cleaning using the PoPPR method. For larger particles (>10 μm), no difference was observed between conventional RR and proposed PoPPR method (p > 0.05). However, the new PoPPR technique was significantly better at removing small PM particles (<2.5 μm) compared to the RR method, specifically for microbeads (p = 0.006) and nanoparticles (p < 0.001). CONCLUSION: This proof-of-concept work demonstrates that the PoPPR method of cleaning contact lenses is as effective as the conventional cleaning method for larger particles such as pollen. The PoPPR method is more effective at removing extremely fine particulate pollutants, including microplastics and nanoparticles. This method offers a potentially more efficient cleaning protocol that could enhance the safety, health, and comfort of contact lens users, especially those living in regions with significant air pollution.
More Papers Like This
Interfacial Engineering of Soft Matter Substrates by Solid-State Polymer Adsorption
AI summary Read the abstract
Researchers investigated interfacial engineering of soft matter substrates through solid-state polymer adsorption, examining how polymer films modify surface properties with implications for materials design and the broader understanding of polymer behavior relevant to plastic persistence in the environment.
Solvent-Based Elimination of Organic Matter from Marine-Collected Plastics
AI summary Read the abstract
Researchers developed a solvent-based method to remove biofouling and organic matter from plastic litter collected from the marine environment before chemical analysis. Reliable protocols for cleaning marine plastics are important for accurately characterizing the types and properties of microplastics in ocean environments.
Molecular dynamics insights into polypropylene microplastics adsorption onto PDMS coated sponge
AI summary Read the abstract
Researchers developed a sponge coated with a silicone-based material (PDMS) that can effectively capture polypropylene microplastics from water, maintaining a 90% removal rate even after 10 cycles of use. Using molecular simulations, they discovered that the microplastics flatten and spread across the sponge surface during adsorption, driven primarily by van der Waals forces between the plastic and silicone. This approach offers a promising, reusable tool for removing microplastics from contaminated water.
Superhydrophobic PDMS coated 304 stainless-steel mesh for the removal of HDPE microplastics
AI summary Read the abstract
Researchers developed a superhydrophobic PDMS-coated stainless-steel mesh that effectively removed high-density polyethylene microplastics from water by exploiting differences in surface wetting properties between water and plastic particles.
Application of solvent-based dissolution method for recycling of ocean plastics and removal of selected persistent organic contaminants
AI summary Read the abstract
Lab tests on ocean plastic (HDPE) contaminated with two harmful chemicals showed that dissolving the plastic in solvents and washing it removed over 99% of the contaminants. The recycled plastic kept its molecular structure and processing qualities similar to other recycled plastic, suggesting this method can clean contaminated ocean plastic for reuse.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.