0
Article Tier 2 Environmental Sources Nanoplastics Remediation Sign in to save

Fabrication of low-cost ceramic microfiltration membranes with controllable pore size distribution using nanometer attapulgite for gravity-driven filtration of microplastic-contaminated roofing rainwater

Journal of Environmental Management 2025 1 citation

AI summary Read the abstract

Low-cost ceramic microfiltration membranes were fabricated for water purification, demonstrating effective removal of suspended particles including microplastics from contaminated water. Affordable membrane materials are important for making microplastic removal accessible in low-resource settings.

Rapid urbanization usually leads to water shortage and roofing rainwater contamination. Although rainwater recycling offers a potential solution to both issues, the complexity in rainwater quality and roofing environments warrants additional concerns. In present study, low-cost ceramic microfiltration membrane with controllable pore size distribution was successfully fabricated with nanometer attapulgite (NMA) and AlO for efficiently treating microplastic-contaminated rainwater in gravity-driven membrane filtration (GDM). Both AlO particle size and starch dosage were optimized for improving membrane porosity, permeability, and hydrophilicity. The decreasing theoretical fouling potential of NMA-AlO membranes was attributed to the reduction in Lewis base sites which might interact with Lewis acid sites on foulants. The feasibility of NMA-AlO membranes for treating rainwater in GDM was systematically assessed in terms of membrane fouling development, mechanism, and pollutant removal efficiency towards typical pollutants (e.g. humic-like substances and microplastics) in rainwater. Noteworthy, membrane pore size distribution could be precisely controlled for reliable microplastic removal and excellent water permeability (∼321 L/(m·h)) with the waterhead of 0.2 m. Over the 140 L/m NMA-AlO membrane filtration of simulated rainwater in GDM, favorable organic removal efficiency (up to 93 %) and considerable permeability (up to 311 L/(m·h)) were also achieved. Economic analysis further highlighted the cost-saving features of NMA-AlO membrane filtration, which total material cost for industry-scale fabrication was only 65-75 $/m and all energy required for roofing rainwater GDM treatment (6.81 × 10 kWh/m) was supplied by gravitational potential energy.

More Papers Like This

Article Tier 2

Ubiquitous microplastics, sources, impacts, and treatment: Importance of cost-effective ceramic membranes for MPs removal

AI summary Read the abstract

This review examines the sources, environmental impacts, and treatment methods for microplastic contamination, with a focus on ceramic membrane filtration. Researchers found that while conventional treatment methods have limitations, ceramic membranes offer cost-effective and durable performance for removing microplastics from water. The study highlights the widespread presence of microplastics across environmental compartments and the urgent need for scalable removal technologies.

Article Tier 2

Evaluation of membranes performance for microplastic removal in a simple and low-cost filtration system

AI summary Read the abstract

Researchers tested three types of filter membranes (polycarbonate, cellulose acetate, and PTFE) for removing microplastics from water in a simple low-cost household system, finding all achieved over 94% removal by mass but that some plastic particles broke into smaller pieces during filtration. Cellulose acetate membranes performed best for long-term home use, offering a practical approach for reducing microplastic exposure from tap water.

Article Tier 2

Application of ceramic membranes for the removal of micro- and nanoplastics from water and wastewater: a review

AI summary Read the abstract

Researchers reviewed ceramic membrane performance for removing micro- and nanoplastics from water, finding rejection efficiencies above 95% under optimized conditions and up to 99% when coupled with advanced oxidation processes, while highlighting that ceramic membranes avoid secondary plastic release that polymeric alternatives can introduce.

Article Tier 2

Low-Cost 3D-Printed Kaolin–Rice-Husk Microporous Membranes for Microplastic Removal: A Comparative Study with a Commercial Ceramic Membrane

AI summary Read the abstract

Researchers made a low-cost filter from clay and rice husks using 3D printing, then tested how well it filtered plastic particles from water compared to an expensive commercial ceramic filter. The low-cost filter fully removed larger microplastic particles but caught fewer of the smallest ones, while costing about 94.5% less than the commercial version.

Article Tier 2

Removal of Microplastics and Performance of a Developed Ceramic Filter

AI summary Read the abstract

Researchers developed a ceramic filter from clay and waste glass with varying porogenic agent content and firing temperatures, then evaluated water permeability, element leaching, and microplastic removal efficiency. The formulation without a porogenic agent achieved the highest microplastic removal rate of nearly 99.8%, demonstrating that optimizing porosity and filtration pressure is key to effective and affordable microplastic filtration.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper