We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics from headwaters to tap water: occurrence and removal in a drinking water treatment plant in Barcelona Metropolitan area (Catalonia, NE Spain)
AI summary Read the abstract
Researchers tracked microplastics through an entire drinking water treatment plant in Barcelona, from river source to tap. The study found microplastic concentrations of about 1 particle per liter in the raw intake water, with sand filtration removing roughly 78% of particles and the overall treatment process achieving 93% removal. Advanced treatments like ultrafiltration and reverse osmosis proved more effective at removing microplastics than conventional ozonation and carbon filtration.
Nowadays, the presence of microplastics in drinking water is of concern worldwide due to potential impacts on human health. This paper has examined the presence of microplastics along the Llobregat river basin (Catalonia, Spain) and studied their behaviour and elimination along the drinking water treatment plant (DWTP). Due to different water composition, different sampling and sample preparation protocols were used to determine microplastics from river water and in the DWTP. Identification of microplastics of size range from 20 μm to 5 mm was performed by fourier-transform infrared spectroscopy (FTIR). Microplastics were detected in 5 out of 7 points along the Llobregat basin, with concentrations ranging between non-detected and 3.60 microplastics/L. In the intake of the DWTP, the mean concentration was 0.96 ± 0.46 microplastics/L (n=5), with a predominance of polyester (PES) and polypropylene (PP) and at the outlet the mean concentration was of 0.06 ± 0.04 microplastics/L with an overall removal efficiency of 93 ± 5%. Sand filtration was identified as the key stage in microplastic removal (78 ± 9%). Furthermore, the results showed that ultrafiltration/reverse osmosis (advanced treatment) is more effective for microplastic removal than ozonation/carbon filtration stage (upgraded conventional treatment). In addition, a preliminary migration test of the different materials used in the DWTP has been performed to identify potential sources of microplastics in each treatment step.
More Papers Like This
Screening of microplastics in water and sludge lines of a drinking water treatment plant in Catalonia, Spain
AI summary Read the abstract
Researchers screened water and sludge throughout a drinking water treatment plant near Barcelona, Spain, for microplastics ranging from 20 to 5,000 micrometers. Microplastics were detected at multiple treatment stages and in the sludge, with conventional coagulation-flocculation and filtration providing partial but incomplete removal.
Microplastics in Treatment Units and Water Recirculation Systems of Two Drinking Water Treatment Plants Feed with Fresh Water in Catalonia (NE Spain)
AI summary Read the abstract
Researchers evaluated microplastic occurrence across treatment units and water recirculation systems in two drinking water treatment plants (DWTPs) in Catalonia, Spain, fed by freshwater sources. The study identified potential hotspots where conventional filtration methods failed to fully eliminate microplastics, providing real-world data on how microplastics persist and accumulate within DWTP infrastructure.
Microplastic occurrence after conventional and nanofiltration processes at drinking water treatment plants: Preliminary results
AI summary Read the abstract
Researchers detected microplastics in source river water and finished drinking water at three treatment plants in the Paris region, finding that standard treatment steps including coagulation-flocculation and sand filtration reduced but did not eliminate MPs. Nanofiltration achieved higher removal rates, suggesting advanced filtration is needed for near-complete MP removal from drinking water.
Microplastic removal across ten drinking water treatment facilities and distribution systems
AI summary Read the abstract
Researchers characterized microplastic removal across ten drinking water treatment facilities and found that conventional municipal treatment achieved greater than 97.5% removal, primarily through granular media filtration or ultrafiltration. Untreated source waters contained between approximately 1,200 and 7,200 microplastic particles per liter, with polypropylene, polyethylene, and polyamide being the most common types. The findings provide valuable data on microplastic exposure through drinking water and the effectiveness of existing treatment processes.
Assessment of microplastic contamination in drinking water from an italian plant: An analytical study
AI summary Read the abstract
Researchers analyzed microplastic contamination at multiple treatment stages in a drinking water plant in northern Italy that processes turbid river water supplemented with groundwater, quantifying particles through sedimentation, flocculation, sand filtration, activated carbon adsorption, and disinfection stages.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.