We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Assessment of Microplastics in a Municipal Wastewater Treatment Plant with Tertiary Treatment: Removal Efficiencies and Loading per Day into the Environment
Summary
This study assessed microplastic removal efficiencies at a Spanish wastewater treatment plant with tertiary treatment including oxidation ditch, rapid sand filtration, and UV disinfection, quantifying the daily microplastic loading remaining in effluent discharged to the environment.
This study investigates the removal of microplastics from wastewater in an urban wastewater treatment plant located in Southeast Spain, including an oxidation ditch, rapid sand filtration, and ultraviolet disinfection. A total of 146.73 L of wastewater samples from influent and effluent were processed, following a density separation methodology, visual classification under a stereomicroscope, and FTIR analysis for polymer identification. Microplastics proved to be 72.41% of total microparticles collected, with a global removal rate of 64.26% after the tertiary treatment and within the average retention for European WWTPs. Three different shapes were identified: i.e., microfiber (79.65%), film (11.26%), and fragment (9.09%), without the identification of microbeads despite the proximity to a plastic compounding factory. Fibers were less efficiently removed (56.16%) than particulate microplastics (90.03%), suggesting that tertiary treatments clearly discriminate between forms, and reporting a daily emission of 1.6 × 107 microplastics to the environment. Year variability in microplastic burden was cushioned at the effluent, reporting a stable performance of the sewage plant. Eight different polymer families were identified, LDPE film being the most abundant form, with 10 different colors and sizes mainly between 1–2 mm. Future efforts should be dedicated to source control, plastic waste management, improvement of legislation, and specific microplastic-targeted treatment units, especially for microfiber removal.
Sign in to start a discussion.
More Papers Like This
Assessment of Microplastics in a Municipal Wastewater Treatment Plant With Tertiary Treatment: Removal Efficiencies and Loading Per Day Into the Environment
Researchers measured microplastic removal efficiency at a Spanish wastewater treatment plant with advanced tertiary treatment, finding it removed about 97% of incoming microplastics but still discharged an estimated 4.6 million microplastic particles per day into the environment. Even high-efficiency treatment plants release substantial microplastic loads into receiving waters.
Quantification and Characterization of Microplastics in Seven Urban Wastewater Treatment Plants
Wastewater treatment plants are a key pathway through which microplastics enter rivers and coastal waters, and this six-month study across seven Spanish treatment plants found that conventional processes offer inconsistent and often inadequate protection. Microplastics were present in all samples, and in some cases effluent concentrations were nearly as high as influent concentrations — meaning the plants were adding little removal value for plastic particles. The dominance of synthetic fibers and the seasonal variation observed point to the need for better tertiary treatment steps to capture microplastics before discharge.
Abundance and Characterization of Anthropogenic Microlitter in Effluent from Three Wastewater Treatment Plants in Gran Canaria (Canary Islands, Spain)
Researchers measured microplastic particles in effluent from three wastewater treatment plants on Gran Canaria, finding that effluent treatment level significantly affected how many particles were released into the environment. Even advanced membrane bioreactor treatment did not completely eliminate microlitter, meaning wastewater plants remain a significant source of microplastics entering aquatic environments.
Average daily flow of microplastics through a tertiary wastewater treatment plant over a ten-month period
A ten-month monitoring study of a tertiary wastewater treatment plant found a consistent daily flow of microplastics through the system, with removal efficiencies varying by particle type and treatment stage but never reaching 100%. The study quantifies the ongoing microplastic release from treated wastewater effluent over an extended period, providing realistic estimates for annual discharge loads.
Influence of wastewater treatment process on pollution characteristics and fate of microplastics
Researchers investigated microplastic abundance and removal efficiency across four wastewater treatment plants using different treatment technologies, finding influent concentrations between 539 and 1,290 particles per liter that were reduced substantially by primary and secondary treatment. Smaller microplastic particles proved hardest to remove and most likely to persist in final effluent.