We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Quantitative analysis of microplastics coagulation-removal process for clean sea salt production
AI summary Read the abstract
Researchers tested several chemical coagulants to remove microplastics from seawater before sea salt production, finding that a silane-based coagulant achieved over 98% removal efficiency, offering a promising approach to keeping microplastics out of table salt.
Sea salt is produced from the evaporation of seawater containing harmful microplastics, and this process leads to sea salt enrichment with microplastics. To solve this issue, the coagulation method for seawater microplastics removal was studied, and Fourier transform infrared spectrometer spectrum was adopted to analyze the amounts of MPs in coagulated flocs. AlCl3, Al2(SO4)3, FeCl3, CH3(CH2)3SiCl3, and CH3(CH2)7SiCl3 were employed as coagulants. The salinities of simulated seawater were manipulated using commercial sea salt. Micron-size poly(n-butyl methacrylate) spheres were used as representative microplastics after confirming their stabilities in seawater. The results indicated that the high microplastic removal efficiencies (exceeding 60%) were achieved by all coagulants. Further, the removal efficiency of silane-based coagulants was enhanced via NaCl addition, whereas the removal performance of AlCl3 was reduced in the presence of excess NaCl. The best performance was obtained using CH3(CH2)7SiCl3: microplastic removal efficiency > 98% for 3 and 15% salinities. Quantitative analysis of coagulated microplastic by Fourier transform infrared spectrometer was in good agreement with experimental data and confirming that aggregated flocs were mainly composed of MPs. Therefore, this coagulation method can be applied for seawater microplastic coagulation, and employing CH3(CH2)7SiCl3 in 15% saline seawater is considered the most efficient process. Furthermore, the developed Fourier transform infrared spectrometer method would be an effective analytical tool for quantitative analysis of microplastic removals from seawater, and optimization of coagulants dosage for the microplastic coagulation–flocculation process.
More Papers Like This
Microplastic contamination along the salt production system: insights from water, sediment, and salt samples
AI summary Read the abstract
Microplastics were tracked through every stage of Indonesian salt production — from seawater and estuarine canals to evaporation ponds, crystallization ponds, and finished salt — finding contamination at all stages with finished salt containing up to 37 items/kg. The results confirm that common dietary salt contains microplastics introduced during open-air solar production, representing a direct and globally widespread route for human ingestion of plastic particles.
Salt in foods: a definitive source of microplastics to humans
AI summary Read the abstract
Analysis of commercial crystal and iodized salts from India and Sri Lanka found 7.9–17.2 microplastic particles per kilogram, predominantly polypropylene and polyethylene fibers under 1 mm, with Indian salt classified at a higher chemical hazard level; daily consumption at WHO-recommended amounts would expose individuals to 14–31 microplastic particles per year. Salt represents a direct, daily dietary exposure route for microplastics, underscoring the need to protect salt production water sources and improve manufacturing processes.
Unveiling Microplastic Pollution in Commercial and Raw Salts from Palk Bay, Southeast Coast of India
AI summary Read the abstract
Researchers analyzed microplastic contamination in raw and commercial salt samples from Palk Bay, India, identifying 205 MP particles per kilogram predominantly as fibers and polymers including polyethylene and PET, with raw salts showing higher contamination than processed commercial salts.
Microplastics—A Review of Sources, Separation, Analysis and Removal Strategies
AI summary Read the abstract
A comprehensive review of microplastic sources, analytical separation techniques, and removal strategies found that plastics enter both aquatic and terrestrial environments through diverse pathways, with no single removal approach currently capable of addressing the full scope of contamination. Developing integrated detection-to-removal pipelines is essential for reducing the environmental load and limiting ongoing human and wildlife exposure.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.