0
Article Tier 2 Environmental Sources Sign in to save

Spinneret geometry modulates the mechanical properties of man-made cellulose fibers

Cellulose 2021 16 citations

AI summary Read the abstract

Researchers found that changing the geometry of the nozzle (spinneret) used to spin cellulose fibers significantly improved the toughness of the resulting textile fibers. Tougher natural fibers are important for making longer-lasting textiles, which reduces the rate at which synthetic garments are replaced and the associated shedding of plastic microfibers during washing. This research supports sustainable textile development as a microplastic reduction strategy.

Abstract The production of cellulose-based textile fibers with high toughness is vital for extending the longevity and thus developing a sustainable textile industry by reducing the global burden of microplastics. This study presented strategies to improve fiber toughness by tuning spinneret geometries. Experimental studies were conducted by spinning with different spinneret geometries and measuring the mechanical and structural properties of the spun fibers. In addition, numerical simulation tools were used to better understand the effects of spinneret geometry. The altering parameters of the spinneret geometries were the capillary diameters D, the angle of the entry cone into the spinning capillary, and the ratio of capillary length to diameter L/D. The highest fiber toughness could be achieved at a capillary aspect ratio of 1 to 2. The obtained maximum fiber toughness was 93 MPa with a tensile strength of 60 cN/tex and a concomitant elongation of 16.5%. For these fiber properties, a 13 wt% solution of a high-purity pulp with higher viscosity in [DBNH][OAc] was spun into a 1.3 dtex fiber using a D100 spinneret with a capillary of 1:1 length/diameter and an entrance angle of 8°. It was noticeable that the microvoid orientations decreased almost linearly with increasing toughness of the fibers. The morphologies of the fibers were similar regardless of the spinneret geometries and the raw materials used in the spinning process. In summary, by modulating the spinneret geometries, Ioncell fibers obtained high toughness that have the potential to replace synthetic fibers.

More Papers Like This

Article Tier 2

Structural Mechanics, Tribological Dynamics, and Microplastic Generation in High-Speed Spinning of Recycled Fibre Blends: A Multi-Physics Quantitative Investigation

AI summary Read the abstract

Recycling cotton and polyester fabrics into new yarn gets trickier the more times it's reprocessed—broken, shorter fibers make the spinning process less stable and shed more microplastic fibers, which can end up in our air, water, and eventually our bodies. The good news: blending in a certain type of plant-based fiber (man-made cellulosic fiber) as a stabilizer let researchers double the amount of recycled cotton used while keeping the yarn strong and reducing these problems—suggesting a practical path to make recycled clothing both higher-quality and less polluting.

Article Tier 2

Reducing microfiber release from polyester fabrics through optimization of spinning process parameters

AI summary Read the abstract

Researchers identified yarn hairiness — the tiny fibers sticking out from a thread — as the primary driver of microfiber release from polyester fabrics during washing, and showed that selecting the right spinning method (Siro compact spinning) at manufacturing can reduce microplastic shedding by minimizing those protruding fibers at the source.

Article Tier 2

Spinnova - The most sustainable textile fibre in the world

AI summary Read the abstract

This paper describes Spinnova's cellulose-based textile fiber as a sustainable alternative to synthetic fibers, highlighting its potential to address multiple environmental problems including microplastic pollution from synthetic textiles during washing. Plant-based fibers that biodegrade rather than shed persistent plastic microfibers represent a promising direction for sustainable textile innovation.

Article Tier 2

Textile Fiber Pollution:Relating Textile Featuresto Fiber Release in Pilling Experiments

AI summary Read the abstract

Researchers evaluated the contribution of physical, dynamic, and thermomechanical textile properties to microfiber release susceptibility in pilling experiments, finding that fiber nature, dimensional features, and mechanical properties collectively determine a textile's propensity to shed microplastic fibers.

Article Tier 2

Study on the Relationship between Textile Microplastics Shedding and Fabric Structure

AI summary Read the abstract

Researchers investigated the relationship between textile fabric structure and microplastic shedding during washing, finding that fabric type, weave pattern, and mechanical stress significantly influence the number of microfibers released.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper