We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Electrochemical degradation of nanoplastics in water: Analysis of the role of reactive oxygen species
Summary
Researchers investigated electrochemical methods for degrading nanoplastics in water and analyzed the role of different reactive oxygen species in the process. They found that the electro-peroxidation process was about 2.6 times more effective than standard electrooxidation, achieving up to 86.8% nanoplastic degradation under optimized conditions. The study presents a promising advanced treatment approach for addressing nanoplastic contamination in water.
Microplastics and nanoplastics (NPs) are emerging water contaminants which have recently gained lots of attention because of their effects on the aquatic systems and human life. Most of the previous works on the treatment of plastic pollution in water have been focused on microplastics and a very limited study has been performed on the NPs treatment. In this work, the role of main reactive oxygen species (ROSs) in the electrooxidation (EO) and electro-peroxidation (EO-HO) of NPs in water is investigated. In-situ generation of hydroxyl radicals (OH), persulfates (SO), and hydrogen peroxide (HO) were performed using boron-doped diamond (BDD) as the anode, whereas titanium (in EO process) and carbon felt (CF, in EO-HO process) were used as cathode. In the EO process, NPs were mainly oxidized by two types of ROSs on the BDD surface: (i) OH from water discharge and (ii) SO via SO reaction with OH. In EO-HO process, NPs were additionally degraded by OH formed from HO decomposition as well as SO generated from direct or indirect reactions with HO. Analysis of the degradation of NPs showed that EO-HO process was around 2.6 times more effective than EO process. The optimum amount of NPs degradation efficiency of 86.8% was obtained using EO-HO process at the current density of 36 mA·cm, 0.03 M NaSO, pH of 2, and 40 min reaction time. In addition, 3D EEM fluorescence analysis confirmed the degradation of NPs. Finally, the economic analysis showed the treatment of NPs using EO-HO process had an operating cost of 2.3 $US.m, which was around 10 times less than the EO process. This study demonstrated that the in-situ generation of ROSs can significantly enhance the degradation of NPs in water.
Sign in to start a discussion.
More Papers Like This
Microplastic pollution remediation: a comprehensive review on electrochemical advanced oxidation processes (EAOPs) for degradation in wastewater
This review critically analyzed electrochemical advanced oxidation processes (EAOPs) for microplastic degradation in wastewater, examining reactive oxygen species mechanisms and identifying the most promising process configurations and future strategies for scaling up electrochemical microplastic treatment.
Treatment of microplastics in water by anodic oxidation: A case study for polystyrene
Anodic oxidation (electrooxidation) was tested as a method for degrading polystyrene microplastics suspended in water. The electrochemical treatment showed progressive microplastic degradation, demonstrating potential for electrooxidation as a water treatment approach targeting suspended plastic particles.
Electrochemical remediation of microplastics: Progress and prospects in water treatment
This review examines electrochemical methods for removing microplastics from water, including electrocoagulation, electro-oxidation, and the electro-Fenton process. Evidence indicates that electro-oxidation can achieve removal rates as high as 99 percent under optimized conditions. The study highlights these techniques as promising alternatives for water treatment but calls for further research to scale them up for real-world applications.
Comparative Analysis of Electrochemical Oxidation and Biodegradation for Microplastic Removal in Wastewater
Researchers compared electrochemical oxidation and biodegradation for removing polystyrene microplastics from wastewater, finding that electrochemical oxidation achieved superior removal efficiency and could serve as a more effective treatment pathway at wastewater treatment plants.
Nanoplastics removal from spiked laundry wastewater using electro-peroxidation process
Researchers tested an electro-peroxidation process for removing nanoplastics from laundry wastewater and found it achieved complete removal in as little as 40 minutes. The naturally occurring chloride ions in laundry water actually accelerated the breakdown of nanoplastics during treatment. The study demonstrates a promising and efficient method for addressing nanoplastic pollution from one of its most common household sources.