We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Waste tea residue adsorption coupled with electrocoagulation for improvement of copper and nickel ions removal from simulated wastewater
Summary
Researchers used activated waste tea leaves combined with an electrical treatment process to remove nearly 100% of copper and nickel from contaminated water without any chemical activating agents, offering a low-cost, sustainable approach to industrial wastewater cleanup.
The present research involves removing copper and nickel ions from synthesized wastewater by using a simple, cheap, cost-effective, and sustainable activated green waste tea residue (AGWTR) adsorption coupled with electrocoagulation (ADS/EC) process in the presence of iron electrodes. By considering previous studies, their adsorbents used for treating their wastewaters firstly activate them by applying either chemicals or activating agents. However, our adsorbent was prepared without applying neither chemicals nor any activating agents. The operating parameters such as pH, hydraulic retention time, adsorbent dose, initial concentration, current density, and operating cost for both metals were optimized. In ADS/EC, the removal efficiency was obtained as 100% for copper and 99.99% for nickel ions. After the ADS/EC process, Fourier transform infrared (FT-IR) spectroscopy, Scanning Electron Microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS) analysis were used to characterize the adsorbent green waste tea residue. The adsorption isotherm and kinetic model results showed that the Langmuir and the pseudo-second-order were well-fitted to the experimental adsorption data better than the Freundlich and pseudo-first-order models for both Cu2+ and Ni2+ with their maximum adsorption capacity of 15.6 and 15.9 mg g-1, respectively. The above results give an option to recycle the metal-based industrial effluents, tea industry-based wastes, enabling a waste-to-green technique for adsorbing and removing the heavy metals and other pollutants in water.
Sign in to start a discussion.
More Papers Like This
Electrocoagulation in Wastewater from Spent-Batteries Recycling
Researchers applied electrocoagulation to reduce heavy metal concentrations in wastewater from spent battery recycling, using ICP-OES analysis to confirm that metals exceeded environmental water standards and testing three electrode material combinations — including iron — in a 500 mL reactor.
Tea/Coffee Sustainable Nanoarchitectures Purify Wastewater
Researchers developed tea- and coffee-derived carbon nanomaterials as sustainable adsorbents for wastewater purification, testing their capacity to remove organic pollutants and heavy metals from contaminated water. The bio-based nanoarchitectures achieved high removal efficiencies comparable to commercial activated carbon.
The Electrocoagulation Method for Removing Zinc and Chromium from Electroplating Industry Wastewater
Researchers used the electrocoagulation method with iron electrodes to simultaneously remove chromium and zinc from electroplating wastewater, finding that optimal removal (99% Cr, 79% Zn) occurred at pH 9 after 30 minutes. The process followed pseudo-first-order kinetics and consumed only 25 kWh/m3, demonstrating economic viability.
Sustainable Optimization of Biotechnology for Cu Recovery from Printed Circuit Boards
Sustainable biotechnology was developed for recovering copper from contaminated sources, including plastic-associated metal pollution. Biologically driven metal recovery reduces the need for energy-intensive chemical processes and could be applied to treat microplastic-metal co-contaminated waste streams.
Electro-coagulation technique using iron [Fe] and aluminium [Al] for microplastics removal from fashion industry wastewater, Thailand
Laboratory tests showed that electrocoagulation — running electrical current through iron and aluminum electrodes — can remove microplastics from textile industry wastewater in Thailand with high efficiency. Because conventional wastewater treatment plants were not designed to capture particles as small as microplastics, electrochemical methods like this represent a promising upgrade to reduce the millions of microplastic particles released daily from textile factories.