We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Optimization of polypropylene microplastics removal using conventional coagulants in drinking water treatment plants via response surface methodology
AI summary Read the abstract
Researchers optimized coagulation of polypropylene microplastics from drinking water using polyaluminium chloride as coagulant and response surface methodology to identify optimal conditions. The maximum predicted removal rate under optimal conditions (pH 9, 200 ppm PACl, 21 ppm polyacrylamide) was approximately 19.7% for the smallest microplastic size tested, indicating that conventional coagulation alone has limited effectiveness for polypropylene microplastics.
BACKGROUND AND PURPOSE: The ubiquitous presence of microplastics (MPs) in aquatic environments has been studied widely. Due to toxicological impacts of MPs and associated contaminants, it is crucial to understand the performance of MPs removal in drinking water treatment plants (DWTPs). Few studies have investigated removal characteristics of MPs via coagulation/flocculation processes, yet removal characterization of polypropylene microplastics (PPMPs) in this process is poorly understood. This study aims to optimize coagulation of virgin PPMPs in conventional DWTPs. METHODS: In this study, samples were synthesized through response surface methodology (RSM), polyaluminium chloride (PACl) was applied as a conventional coagulant to remove PPMPs in the coagulation/flocculation process, which has the least density among common polymers and is one of the most abundant manufactured polymers worldwide. A particle size analyzer (PSA) was used to measure floc size at different pH levels. Additionally, a zeta potential analyzer was used to measure stability of the flocs at different pH. RESULTS: Base on the experimental range in Design-Expert, results revealed that the optimum removal rate was predicted to be at pH 9, PACl concentration of 200 ppm, polyacrylamide (PAM) concentration of 21 ppm, and PPMPs size of d < 0.25 mm. According to the predicted optimum condition, actual and predicted removal rates were 18.00 ± 1.43% and 19.69%, respectively. CONCLUSION: According to this study, PACl is not capable of efficiently removing virgin PPMPs in DWTPs, thereby exposing humans to eco-toxicological impacts of PPMPs through tap water.
More Papers Like This
Effect of Fe and Al based coagulants and disinfectants on polyethylene microplastics removal in coagulation process through response surface methodology
AI summary Read the abstract
Researchers optimized polyethylene microplastic (PEMP) removal from drinking water using response surface methodology (RSM) with Box-Behnken Design, testing pH, PEMP size, coagulant dosage, and polyacrylamide dosage as independent variables. Comparing ferric chloride and poly aluminum chloride as coagulants, they identified optimal conditions for maximizing PEMP removal efficiency, providing guidance for improving microplastic removal at drinking water treatment plants.
Investigating the Potential of Coagulants to Improve Microplastics Removal in Wastewater and Tap Water
AI summary Read the abstract
Researchers found that adding coagulants (FeCl3 or Al2(SO4)3) to wastewater and tap water improved microplastic removal, with aluminum sulfate achieving 43% and 62% removal efficiencies respectively, though the high concentrations required suggest that combining coagulants with organic polyelectrolytes could improve practicality.
Microplastic removal in coagulation-flocculation: Optimization through chemometric and morphological insights
AI summary Read the abstract
Researchers optimized the coagulation-flocculation process — a standard water treatment step where chemicals cause particles to clump and settle — for removing three types of microplastics: polypropylene, polyethylene, and polystyrene. Polystyrene was removed most efficiently, and adjusting pH, coagulant type, and dosage significantly improved removal rates, providing practical guidance for upgrading existing water treatment plants to better capture microplastics.
Enhancing microplastic removal from natural water using coagulant aids
AI summary Read the abstract
Researchers tested different chemical treatments for removing microplastic beads from natural water and found that polyaluminium chloride combined with polyacrylamide achieved over 95% removal across six common plastic types. The treatment worked on particles ranging from 10 to 1,000 micrometers, and natural organic matter in the water actually improved performance. The findings suggest that optimizing standard water treatment processes could be a practical way to reduce microplastic contamination in drinking water sources.
Elimination of a Mixture of Microplastics Using Conventional and Detergent-Assisted Coagulation
AI summary Read the abstract
Researchers tested coagulation as a method to remove microplastics from tap water, evaluating how microplastic type (PE and PVC), water pH, coagulant dose, and microplastic concentration affect removal efficiency, and finding that detergent-assisted coagulation improves performance.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.