0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Remediation Sign in to save

Microplastics generation and concentration during mechanical-biological treatment of mixed municipal solid waste

Environmental Research 2022 27 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 40 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Анастасія Шолохова, Гінтарас Денафас, Valeriy Mykhaylenko

Summary

Researchers found that mechanical-biological treatment of mixed municipal solid waste generates and concentrates microplastics across multiple processing stages, with the stabilized organic output containing significant microplastic loads — raising concerns about the use of this material as compost or soil amendment.

Mechanical-biological treatment (MBT) is a popular solution for the processing of mixed municipal solid waste (MSW). However, it is assumed that the treatment processes can lead to the generation of microplastics in large quantities and their concentration in the organic output. Organic outputs from MBT as a source of microplastics are still poorly understood. The current article aims to fill this gap and investigate microplastics formation during MBT and their abundance in ready stabilized organic output. Seasonal samples were taken from the four stages of the possible microplastics pathway in MBT to study changes in microplastics numerical and mass concentration, shape and size. Large microplastics were identified by Fourier transform infrared spectroscopy, and small microplastics by Nile Red dye staining method. The results showed that both mechanical pre-treatment and aerobic treatment had a significant impact on microplastics formation, while mechanical post-treatment only resulted in the enrichment of the output with microplastics. Moreover, microplastics became finer during treatment. Microplastics abundance in ready organic output ranged from 8925 ± 1344 particles/kg in winter 2021 to 17407 ± 4319 particles/kg in summer 2020, and up to 160.5 t of microplastics were emitted from the Kaunas MBT treatment facility during the study year. In addition, a relationship between the microplastics abundance and plastic content of the incoming waste was found by a regression analysis. Therefore, to reduce the formation and emission of microplastics by MBT, the organic fraction of MSW should be collected and treated separately.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Microplastics identification and quantification in the composted Organic Fraction of Municipal Solid Waste

Researchers quantified microplastics in composted organic municipal solid waste from five facilities, finding contamination levels that raise concerns about compost quality and the potential transfer of microplastics to agricultural soils through organic waste recycling.

Review Tier 2

The organic output from mechanical–biological treatment plants as a source of microplastics: Mini-review on current knowledge, research methodology and future study perspectives

This mini-review examined mechanical-biological treatment plants — facilities that process mixed municipal waste before landfilling — as a potentially major but overlooked source of microplastics. These facilities release microplastics in their organic output, which is sometimes spread on agricultural land.

Article Tier 2

Microplastic Contamination of Composts and Liquid Fertilizers from Municipal Biowaste Treatment Plants: Effects of the Operating Conditions

Researchers measured microplastic contamination in fertilizers produced from municipal organic waste and found that while solid composts generally stayed within regulatory limits, liquid fertilizers from some facilities contained up to 10,000 plastic particles per liter — raising concerns about microplastic inputs to farmland from compost and digestate applications.

Article Tier 2

Plastic input and dynamics in industrial composting

Researchers quantified plastic input and dynamics at five stages of an industrial composting process, tracking macroplastics in municipal bio-waste collections from different municipalities (0.36-4.72 kg/ton, dominated by PE and PP) and measuring microplastic concentrations through shredding and screening to assess removal or enrichment.

Article Tier 2

Distribution characteristics of microplastics in typical organic solid wastes and their biologically treated products

Researchers extracted and characterized microplastics from food waste, livestock manure, sludge, and their composted or digested products, finding MPs in all organic waste types with concentrations varying by matrix. The study highlights organic waste management pathways as an understudied route for microplastic transfer to agricultural soils.

Share this paper