We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Sewage Transport Volumes and Physical Degradation Rates of Personal Care Wipes
Summary
Researchers measured the physical degradation rates and transport of personal care wipes through sewage systems, finding that many 'flushable' brands do not break down adequately and contribute to sewer blockages and environmental microplastic pollution.
ABSTRACT As personal care wipes become increasingly popular, inappropriate disposal to the sewage system is raising significant environmental and economic concerns. Many common brands, while marketed as “flushable,” do not degrade appreciably in the plumbing and piping fixtures that the sewage transits. As such, these wipes can cause a myriad of problems including sewer blockage and destruction of pumps and grinders. This work sought to better understand key factors influencing the onset of such problems, including the volume of wipes present in the sewer and the degradation rates associated with a variety of personal wipe products, both “flushable” and nonflushable. The results suggest no correlation between the quantity of wipes in sewage and either the preceding precipitation or the sewage flow rate. To examine their degradability within a sewer system, we evaluated the degradation over time for six commercially available wipes under four conditions: static, kinetic, tap water, and sewage water. Five of the six wipe types were greater than 93% intact after 48 h of exposure to sewer‐like conditions and only one wipe type degraded to less than 14% of its initial volume after 48 h, which is similar to the degradation performance of tested toilet paper. Degradation rates were highest in tap water under kinetic conditions and lowest in raw sewage water under static conditions.
Sign in to start a discussion.
More Papers Like This
Reduced dispersibility of flushable wet wipes after wet storage
Researchers found that flushable wet wipes—marketed as safe to flush—lose their ability to break apart in water when stored wet for extended periods. This means wet wipes can cause blockages in sewer systems and, when they do reach waterways, persist as plastic debris that contributes to microplastic pollution.
Lifecycle of a Wipe: Determining the Contamination, Fate, and Transformation of Wet Wipe Pollution in the Environment
Plastic wet wipes are a significant but underappreciated source of microplastic pollution in urban waterways, largely because many products are mislabeled as "flushable" despite being made of synthetic materials like polypropylene and polyester. Researchers collected hundreds of wipes from a London river and showed that 99% were plastic, and lab experiments confirmed that wipes break apart into microplastics when wet — with polypropylene shedding more particles than polyester. Better labeling and stricter industry standards are needed to prevent these products from entering sewer systems and ultimately fragmenting into the microplastic particles found throughout aquatic environments.
Characterisation of “flushable” and “non-flushable” commercial wet wipes using microRaman, FTIR spectroscopy and fluorescence microscopy: to flush or not to flush
Researchers used Raman spectroscopy, FTIR, and fluorescence microscopy to characterize "flushable" and "non-flushable" commercial wet wipes, finding that most contained synthetic polymer fibers regardless of their labeling. The study contributes to evidence that wet wipes marketed as flushable can still contribute microfibers and non-degradable materials to wastewater and sewer systems.
The role of wet wipes and sanitary towels as a source of white microplastic fibres in the marine environment
White microplastic fibers found near a wastewater outfall were chemically matched to fibers from commercially available wet wipes and sanitary towels, many of which are made from polyester and polypropylene rather than natural materials. The study identifies these flushed personal hygiene products as a direct source of white synthetic fibers in coastal marine sediments.
Discharge of microplastics fibres from wet wipes in aquatic and solid environments under different release conditions
Researchers studied how wet wipes release microplastic fibers under different conditions, including rubbing on hands and immersion in water. They found that wet wipes released significantly more polyester microfibers when submerged in water (up to 1,966 fibers per sheet when wet) compared to being rubbed on hands or solid surfaces. The findings suggest that flushing wet wipes poses a substantially greater risk of microplastic pollution to aquatic environments than disposal in regular waste.