We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Upcycling Glass Waste into Porous Microspheres for Wastewater Treatment Applications: Efficacy of Dye Removal
Summary
Researchers upcycled waste glass into porous recycled glass microspheres via flame spheroidisation and tested their capacity for dye removal from wastewater, finding maximum monolayer adsorption capacities of 78 mg/g for Acid Red 88 and 20 mg/g for methylene blue, with removal driven by electrostatic interactions and hydrogen bonding confirmed by XPS and FTIR analysis.
Each year about 7.6 million tons of waste glasses are landfilled without recycling, reclaiming or upcycling. Herein we have developed a solvent free upcycling method for recycled glass waste (RG) by remanufacturing it into porous recycled glass microspheres (PRGMs) with a view to explore removal of organic pollutants such as organic dyes. PRGMs were prepared via flame spheroidisation process and characterised using Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and Mercury Intrusion Porosimetry (MIP) analysis. PRGMs exhibited 69% porosity with overall pore volume and pore area of 0.84 cm3/g and 8.6 cm2/g, respectively (from MIP) and a surface area of 8 m2/g. Acid red 88 (AR88) and Methylene blue (MB) were explored as a model source of pollutants. Results showed that removal of AR88 and MB by PRGMs was influenced by pH of the dye solution, PRGMs doses, and dye concentrations. From the batch process experiments, adsorption and coagulation processes were observed for AR88 dye whilst MB dye removal was attributed only to adsorption process. The maximum monolayer adsorption capacity (qe) recorded for AR88, and MB were 78 mg/g and 20 mg/g, respectively. XPS and FTIR studies further confirmed that the adsorption process was due to electrostatic interaction and hydrogen bond formation. Furthermore, dye removal capacity of the PRGMs was also investigated for column adsorption process experiments. Based on the Thomas model, the calculated adsorption capacities at flow rates of 2.2 mL/min and 0.5 mL/min were 250 mg/g and 231 mg/g, respectively which were much higher than the batch scale Langmuir monolayer adsorption capacity (qe) values. It is suggested that a synergistic effect of adsorption/coagulation followed by filtration processes was responsible for the higher adsorption capacities observed from the column adsorption studies. This study also demonstrated that PRGMs produced from recycled glass waste could directly be applied to the next cyclic experiment with similar dye removal capability. Thus, highlighting the circular economy scope of using waste inorganic materials for alternate applications such as pre-screening materials in wastewater treatment applications.
Sign in to start a discussion.
More Papers Like This
Adsorption of acid and basic dye from the simulated wastewater using carbonized microplastic particles synthesized from recycled polyethylene terephthalate plastic waste bottles: an integrated approach for experimental and practical applications
Researchers carbonized waste PET plastic bottles to create microplastic-like adsorbent particles and demonstrated their effectiveness in removing over 99% of methylene blue and methyl orange dyes from simulated wastewater, with adsorption optimized by response surface methodology and confirmed as exothermic, spontaneous, and applicable to real wastewater.
Rapid adsorptive removal of eosin yellow and methyl orange using zeolite Y
Researchers synthesized zeolite Y using an energy-efficient method that recycles waste heat from a chemical reaction instead of external heating, then tested it as an adsorbent to remove two industrial dyes from water. The zeolite effectively removed both dyes, with adsorption best described by standard mathematical models, indicating its potential as a low-cost material for treating dye-contaminated wastewater.
Removal of Microplastics and Performance of a Developed Ceramic Filter
Researchers developed a ceramic filter from clay and waste glass with varying porogenic agent content and firing temperatures, then evaluated water permeability, element leaching, and microplastic removal efficiency. The formulation without a porogenic agent achieved the highest microplastic removal rate of nearly 99.8%, demonstrating that optimizing porosity and filtration pressure is key to effective and affordable microplastic filtration.
Optimization of methylene blue dye degradation using heterogeneous Fenton-like reaction with Fe3O4 nanoparticles/PVDF macrospheres: A response surface methodology approach
Researchers characterized polypropylene microplastics using SEM and FTIR analysis, finding irregular shapes with cracks and a size distribution of 14-96 micrometers, and tested sodium lauryl sulfate at 5% concentration as an effective dispersant for improving stability in suspension. The study provides foundational insights into polypropylene microplastic physical and chemical properties relevant to toxicological testing and environmental fate studies.
A reusable mesoporous adsorbent for efficient treatment of hazardous triphenylmethane dye wastewater: RSM-CCD optimization and rapid microwave-assisted regeneration
Researchers synthesized a porous nanomaterial made from calcium and aluminum that can adsorb large amounts of the toxic industrial dye malachite green from wastewater, then rapidly regenerate it for reuse using microwave heating — retaining over 90% efficiency after five cycles. The approach offers an energy-efficient and reusable solution for removing hazardous organic pollutants from industrial wastewater.