We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Composition Optimisation of Selected Waste Polymer-Modified Bitumen
AI summary Read the abstract
This study examined how recycled polypropylene and polyethylene plastomers can be blended into bitumen for road paving, evaluating how mixing conditions affect the properties of the modified asphalt.
Waste plastomer disposal is currently a major challenge facing modern economies. This article reports on a study and analysis regarding the implementation of plastomers into bitumen, with a special focus on the influence of mixing process factors. Two plastomers were selected for analysis, PP and PET, and two bitumen types, 20/30 and 70/100, were modified. Determination of the basic characteristics, such as penetration, softening temperature, cohesion energy, and Fraass temperature, was complemented with advanced multiple-stress creep recovery (MSCR) rheological testing. The entire experimental process followed the Plackett−Burman design. Rheological effects of modified bitumen were evaluated using the generalized Maxwell model. Microstructural analysis with epi-fluorescence microscopy showed the ability of plastomer-modified bitumen to obtain a fine-grained structure with a particle size of <10 μm. In addition, creep susceptibility (Jnr) was found to be statistically significantly dependent on the polymer type and particle size, rotational speed, and bitumen type. In turn, the particle dispersion structure in the bitumen matrix significantly depended on the rotational speed, plastomer particle size, and mixing temperature. Ultimately, the process of bitumen 70/100 modification was optimized. It was demonstrated, following the experimental design, that by using fine-grained PP for a temperature of 160 °C, rotational speed of about 6300 rpm and time of 105 min, it is possible to obtain modified bitumen with rheological properties very similar to those of modified bitumen PmB 45/80-55.
More Papers Like This
Sustainable Polymers from Recycled Waste Plastics and Their Virgin Counterparts as Bitumen Modifiers: A Comprehensive Review
AI summary Read the abstract
This review comprehensively examined the use of both recycled waste plastics and virgin polymers as bitumen modifiers for road pavements, evaluating how different polymer types improve pavement performance and service life.
Investigation of the rheological properties of low-density polyethylene (LDPE) modified bitumens using two plastic wastes
AI summary Read the abstract
Researchers modified road bitumen with low-density polyethylene (LDPE) plastic waste to improve its performance characteristics. The LDPE-modified bitumen showed improved rheological properties, demonstrating a practical use for plastic waste in road construction that could divert it from landfills and waterways.
Evaluating Effectiveness of Multi-Component Waste Plastic Bags on Bitumen Properties: Physical, Rheological, and Aging
AI summary Read the abstract
Researchers characterized waste plastic bag samples dominated by low-density and linear low-density polyethylene and tested their performance as bitumen modifiers, finding they improved rutting resistance by one performance grade. The study evaluates a practical route for valorizing plastic waste in road construction materials.
Experimental Study on Plastic Waste as an Additive in Bitumen
AI summary Read the abstract
Researchers blended plastic waste into bitumen at varying proportions and evaluated the modified mixture using standard road engineering tests, finding improvements in softening point and rutting resistance that suggest waste plastic can enhance pavement durability when incorporated at optimized concentrations.
Recycling micro polypropylene in modified hot asphalt mixture
AI summary Read the abstract
This study incorporated recycled polypropylene microplastics into hot asphalt mixtures and evaluated the resulting performance, finding that small additions of plastic waste can improve certain mechanical properties of asphalt while offering a pathway to reuse plastic waste in road construction.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.