We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Enhanced photocatalytic activity of electrospun TiO2/polyacrylonitrile membranes in a crossflow reactor using dual lights
Summary
Researchers developed electrospun TiO2/polyacrylonitrile membranes with up to 60% TiO2 nanoparticle loading and tested them in a crossflow photocatalytic reactor with dual-sided illumination, finding that bilateral irradiation significantly enhanced photocatalytic degradation of pollutants compared to conventional single-sided membrane reactors.
Abstract Photocatalytic membranes reactors have become one of the most efficient technologies to treat polluted waters. However, a major drawback is the unilateral irradiation of the membrane, where only one side of the membrane is exploited. To overcome this issue, we developed a reactor where the membrane can be irradiated on both sides. Polyacrylonitrile membranes containing different amounts of TiO 2 nanoparticles up to 60% were first prepared by electrospinning. These membranes were used in a 3D-printed crossflow photocatalytic membrane reactor for the degradation of methylene blue under different combinations of lights. The use of both sides of the photocatalytic membrane significantly enhanced the photocatalytic activity for the decolorization of methylene blue in water. The prepared membranes showed the best decolorization rate for a loading of 60% of TiO 2 and the use of dual ultraviolet lights, where the methylene blue solution was completely discolored after 90 min. This is the first report of a such system configuration, and this new irradiation concept is promising for photocatalytic membrane reactions and water cleaning.
Sign in to start a discussion.
More Papers Like This
Integration of Photocatalysis and Membrane Technology as a Hybrid System for Microplastic Degradation in Wastewater
Researchers evaluated a hybrid system combining TiO2 photocatalysis with membrane filtration for degrading microplastics in wastewater. The photocatalytic membrane reactor demonstrated effective removal and degradation of polyethylene, polypropylene, and PET microplastics, suggesting that integrated photocatalytic-membrane systems could improve microplastic removal beyond what conventional wastewater treatment achieves.
Fotokataliza i materiały kompozytowe TiO2/SiO2 w oczyszczaniu środowiska
This review examines the role of photocatalysis and TiO2/SiO2 composite materials as innovative methods for environmental remediation, particularly for removing water and air pollutants, while addressing the limitations of conventional treatment approaches. The analysis covers the mechanisms of TiO2 photocatalysis, its constraints including low visible-light activity, and how structural and chemical modifications through SiO2 compositing can overcome these limitations.
Uniform formation and characterization of Au/TiO2 nanoparticles for electrokinetically assisted optofluidic reactors
Researchers developed uniformly formed Au/TiO2 nanoparticles for use in plasmonic photocatalytic optofluidic reactors, addressing the limitation of TiO2's poor visible-light absorption by incorporating gold nanoparticles to enhance solar energy utilization for water purification. The study characterized the nanoparticles' formation and performance in electrokinetically assisted photocatalytic treatment of organic wastewater compounds.
Supported TiO2 in Ceramic Materials for the Photocatalytic Degradation of Contaminants of Emerging Concern in Liquid Effluents: A Review
This review systematized research on TiO2 photocatalysts supported on ceramic materials for degrading emerging contaminants in liquid effluents, comparing immobilization techniques and reactor configurations and identifying supported ceramic-TiO2 systems as a promising technology for water treatment that avoids the catalyst separation challenges of slurry reactors.
Tailoring visible-light active TiO2/cellulose nanocomposites with controlled crystalline structure for enhanced photocatalytic performance
Researchers developed a simple, low-temperature method for growing titanium dioxide nanoparticles on cellulose without the need for high-heat processing. The study found that by adjusting acid concentration and temperature, they could control the crystal structure of the nanoparticles, with a mixed-phase version achieving over 99% degradation of a test dye under visible light. These findings suggest a greener approach to creating photocatalytic materials for breaking down pollutants.