0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Human Health Effects Remediation Sign in to save

Magnetic Field Effect on Coagulation Treatment of Wastewater Using Magnetite Rice Starch and Aluminium Sulfate

Polymers 2022 16 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 45 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Emmanuel Kweinor Tetteh, Emmanuel Kweinor Tetteh, Nomthandazo Precious Sibiya, Emmanuel Kweinor Tetteh, Emmanuel Kweinor Tetteh, Sudesh Rathilal Sudesh Rathilal Gloria Amo‐Duodu, Emmanuel Kweinor Tetteh, Sudesh Rathilal Sudesh Rathilal Sudesh Rathilal Sudesh Rathilal

Summary

Magnetite-rich nanomaterials combined with an applied magnetic field were tested to enhance coagulation of suspended particles from wastewater, showing improved removal efficiency and enabling rapid magnetic separation and reuse. The approach offers an alternative to synthetic coagulants that carry health and environmental risks.

Study Type Environmental

The use of synthetic coagulants to reduce suspended particles from drinkable water and wastewater is prompting new issues because it poses many health and environmental risks. Hence, improving the coagulation process using sophisticated nanotechnology with a magnetic field (MF) for quick recoverability emerges as being useful. In this study, the effects of magnetite rice starch (MS) and aluminum sulfate (alum) were investigated at a constant dose (3 g or 3000 mg/L) using a Jar test (six beakers) as potential low-cost coagulants for industrial wastewater treatment. At a high magnification of 1000× and a surface pore size of 298 µm, scanning electron microscopy and energy dispersive X-ray (SEM/EDX) analyses were utilized to elucidate the morphology of the coagulants. Coagulation was performed at 150 rpm (quick mixing) for 2 min, and 30 rpm (slow mixing) for 15 min. Thereafter, samples were allowed to settle (10-60 min) with and without MF. The findings showed more than 65% contaminants removal (turbidity and TSS) and 30% chemical oxygen demand (COD) removal using alum while MS showed 80% contaminants removal (turbidity and TSS) and 50% COD removal. MS showed an increase of more than 3% in contaminants removal (COD, turbidity, and TSS) when exposed to MF. As a result, the use of MS together with MF in water and wastewater treatment is anticipated as an environmentally benign and effective coagulant.

Sign in to start a discussion.

Share this paper