0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Environmental Sources Food & Water Human Health Effects Nanoplastics Policy & Risk Sign in to save

Preparation and Characterization of Cellulose Nanoparticles from Agricultural Wastes and Their Application in Polymer Composites

Scholars International Journal of Chemistry and Material Sciences 2023 2 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 40 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
M. H Uddin, M. M Haque

Summary

Researchers developed eco-sustainable bio-nanocomposite materials by extracting cellulose nanoparticles from agricultural waste such as rapeseed straw, demonstrating their potential as renewable, biodegradable alternatives to synthetic nanomaterials.

Models

, Page no - | ABSTRACT | PDF | FULL TEXT | e-PUB Background: The development of innovative eco-sustainable bio-nano-composites materials based on cellulose nanomaterials obtained from agricultural waste such as rapeseed plant straw and polymeric materials with improved properties. At first, cellulose was extracted from rapeseed plant straw and cellulosic and no cellulosic materials were estimated. It was found that the rapeseed plant straw contained about 43.48 wt.% cellulosic materials and 56.52 wt.% no cellulosic materials. It was also found that the rapeseed plant straw content about 34.84 wt.% α- cellulose. Then, nano-cellulose was prepared by acid hydrolysis of α -cellulose obtained from rapeseed plant straw. Poly vinyl acetate (PVAc) was prepared by soap free emulsion polymerization of vinyl monomer. Natural rubber (NR) collected as latex was oxidized by KMnO4. Blends of NR and oxidized NR with PVAc of different compositions such as NR60/PVAc40, NR40/PVAc60, ONR60/PVAc40, ONR40/PVAc60 were prepared by mixing NR latex and PVAc emulsion and followed by drying in an oven at 60°C. Composites of NR60/PVAc40 and ONR60/PVAc40 reinforced nano-cellulose (NC) were also prepared in similar way. The blends and composites were then characterized by FTIR, SEM, and Tensile test (TS). FTIR analysis confirmed the oxidation of NR and shown the variation of the functional groups in the blends and composites compared with the FTIR spectrum of NR, ONR and PVAc. SEM study exhibited that the nano-cellulose were dispersed within NR/PVAc and ONR/PVAc blends matrices with a little agglomeration. The tensile test results showed that the strength in composites was increased due to the reinforcing effect of nano-cellulose (NC). Objectives: The aim of this study is to assess the Preparation and characterization of binary blends of NR and oxidized NR with PVAc. Methods: This is an observational study. The study used to be carried out in the admitted patient’s Department of Applied Chemistry and Chemical Engineering, Islamic University, Kushtia-7003, Bangladesh. The duration of the period from Data was entered in MS Excel and Statistical analysis was done using SPSS trial version. Results: This study shows that the according to Constituent, Cellulose was 43.4822%, Alpha-Cellulose were 34.8427% and Cellulose were 8.6395%. And according to Source, Rice Straw were 32.15% %, Sugarcane were 41-43%, Rye Straw were 31.8-42.64%, Corn Stalks were 29.80% and Wheat Straw were 34-40%. Conclusion: Novel eco-friendly bio-nano-composites substances primarily based on renewable and sustainable assets namely natural rubber (NR) and nano-cellulose received from rapeseed plant straw as properly as poly vinyl acetate (PVAc) have been developed. In order to enhance the interfacial interactions amongst the composite factors such as NR, PVAc and NC, oxidation of the NR latex was once carried out by way of KMnO4 before blending mixing with PVAc emulsion and NC suspension.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Renewable cellulosic nanocomposites for food packaging to avoid fossil fuel plastic pollution: a review

Researchers reviewed how cellulose nanoparticles extracted from plant biomass can replace petroleum-based plastics in food packaging, finding that adding just 1–5% cellulose nanoparticles significantly improves strength, reduces oxygen and water vapor permeability, and keeps packaging biodegradable. The review positions cellulose nanocomposites as a scalable, eco-friendly alternative to fossil-fuel plastics that contribute to microplastic pollution.

Article Tier 2

Mechanical and morphological properties of cellulose nanocrystals synthesized from industrial hemp agro-waste

This study extracted cellulose nanocrystals from hemp agricultural waste using ammonium persulfate treatment, providing a biodegradable alternative to petroleum-based nanomaterials. The approach addresses growing hemp agro-waste from the expanding US hemp industry while producing eco-friendly nanomaterials with potential uses in packaging, composites, and drug delivery.

Article Tier 2

Microbial nanocellulose biotextiles for a circular materials economy

Researchers developed sustainable biotextiles from microbial nanocellulose combined with ancient textile techniques, creating rapidly renewable, low-toxicity, and biodegradable materials as circular economy alternatives to synthetic plastic-based fabrics.

Article Tier 2

Nanocelulosas producidas por un proceso de oxidación no convencional: interacciones y aplicaciones

This study developed cellulose micro/nanofibers from plant cell walls using unconventional oxidation and mechanical processes, producing biodegradable biomaterials proposed as renewable alternatives to petroleum-based plastics that generate microplastic pollution.

Article Tier 2

Cellulose Nanopaper: A Study of Composition and Surface Modifications to Develop Sustainably-Sourced Alternatives to Plastics

This study developed cellulose nanopaper — derived from wood pulp — with surface modifications to improve its properties as a sustainable alternative to petroleum-based plastic packaging films. The research addresses the need for biodegradable packaging materials that reduce the plastic waste that becomes microplastic contamination.

Share this paper