0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Environmental Sources Policy & Risk Remediation Sign in to save

Garment ageing in a laundry care process under household‐like conditions

Applied Research 2023 1 citation ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count.
Claudia Heller, Korinna Altmann, Braun, Ulrike, Alexander Kerndorff, Claus Gerhard Bannick, Monika Fuchs, Paul Uwe Thamsen

Summary

This study measured how repeated household-style washing affects garments and how much fiber is released into wash water over 30 cycles. The findings contribute to understanding synthetic microfiber shedding from textiles during laundry, which is a significant source of microplastic fiber pollution in waterways.

Abstract This study reflects typical consumer textile washing behaviour while taking into account existing standards in the household appliance and garment industries. Two garments were washed repeatedly with artificial dirt and detergent 30 times. The collected washing water was separated using fractional filtration. Textile physical tests were used to follow property changes of the garments, the microplastic release is determined using thermoextraction/desorbtion–gas chromatography/mass spectrometry and the total organic carbon was measured as a sum parameter for the organic bonded carbon. This article shows the importance of a reality‐based approach when investigating microplastics of textile origin in the laundry care process. Deposits of detergent and dirt on the textiles were detected. The total mass of sieve residues was much higher than the release of synthetic polymers. The cotton content of the garments causes a much higher fibre release than synthetic fibres. Both will lead to false results by purely gravimetric analysis because nonpolymer fibres will be included microplastic mass. The results cannot be generalised only by the main polymer type, knowledge of the textile construction must be included for final evaluation.

Share this paper