We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A Production and Fractionation Protocol for Polyvinyl Chloride Microplastics
AI summary Read the abstract
Researchers developed an efficient protocol for producing and fractionating PVC microplastics using cryogenic grinding and wet-sieving, generating particles with controlled size distributions suitable for standardized laboratory exposure studies.
Concerns about the presence of microplastics in the environment has increased in recent years, prompting more attention from scientists. Thorough exposure studies using artificially produced microplastics containing additives are required to assess their potentially hazardous effects. Therefore, an efficient microplastic production and fractionation protocol was established using a cryogenic grinding and wet-sieving approach. The developed cryogenic grinding method was able to produce (20-40 g/h) polyvinyl chloride (PVC) microplastics having a volume-weighted mean particle size of 391 µm and a span of 2.12. Performing a second grinding cycle on the same particles resulted in microplastics which were smaller (volume-weighted mean size = 219 μm) and had a narrower particle size distribution (span = 1.59). In addition, the microplastics were also fractionated into different particle size ranges using a vibrating wet-sieving tower. The latter technique allowed separating 10 g of PVC microplastics into seven different fractions using six sieves (Ø 200 mm) for 30 min while shaking. By using the developed method, PVC microplastics could easily be made and fractionated into desired particle-size ranges. The proposed protocol could also be adjusted to produce and fractionate microplastics of other plastics.
More Papers Like This
Protocol for the production of micro- and nanoplastic test materials
AI summary Read the abstract
Researchers developed a standardized protocol for producing well-characterized polypropylene and PVC micro- and nanoplastic test materials through cryogenic milling and sedimentation fractionation, yielding size fractions from below 1 µm to 300 µm with contamination below 1 wt% that remained stable in BSA solution over nine months.
Protocol for the production of micro- and nanoplastic test materials
AI summary Read the abstract
Scientists created a standardized protocol for producing well-characterized micro and nanoplastic test materials from polypropylene and PVC for use in health research. Current studies often use commercially available plastic beads that do not resemble real-world microplastics, making results hard to interpret. Having realistic, standardized test materials will improve the quality and comparability of future research on microplastic health effects.
An assessment of methods used for the generation and characterization of cryomilled polystyrene micro- and nanoplastic particles
AI summary Read the abstract
Researchers evaluated cryomilling as a method for generating environmentally realistic microplastic and nanoplastic particles from polystyrene for use in laboratory studies. They found that increasing the number of milling cycles consistently produced smaller particles without altering the polymer's chemical composition. The study provides optimized protocols for creating heterogeneous test particles that more closely resemble the microplastics found in real environmental samples.
Cryogrinding and sieving techniques as challenges towards producing controlled size range microplastics for relevant ecotoxicological tests
AI summary Read the abstract
Researchers tested cryogenic grinding and liquid sieving methods to produce controlled-size microplastics (20-60 μm) from real pearl farming equipment for ecotoxicological testing, finding the protocol effective but noting challenges with overproduction of smaller particles.
Polyvinyl chloride microplastic detection by single particle inductively coupled plasma mass spectrometry for the characterization of model microplastics
AI summary Read the abstract
This study developed and validated a single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) methodology to detect and characterize PVC micro- and nanoplastics, producing model particles suitable for risk assessment studies. SP-ICP-MS represents an important analytical advance for PVC microplastic characterization, as PVC is one of the most widely used and toxic plastics, and reliable model particle standards are essential for standardized toxicological testing.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.