Co-Combustion Investigation of Wood Pellets Blended with FFP2 Masks: Analysis of the Ash Melting Temperature

The COVID-19 pandemic brought a period of high consumption of protective masks and an increase in their waste. Therefore, it was necessary to look at possibilities for their disposal. This article is focused on the disposal of FFP2 masks in the form of pellets blended with sawdust. Further, their ash melting behavior was observed. The method of ash preparation can impact the resulting values of melting temperatures. Therefore, this article investigates the resulting values of ash melting temperatures determined during different ash preparations, such as temperatures (550 °C and 815 °C) and ash size (non-sifted, smaller than 50 µm and 100 µm). All measured deformation temperatures were higher than 1100 °C and even higher than 1200 °C for some samples. Moreover, the presence of FFP2 masks in pellets only insignificantly affected the values of melting temperatures compared to pure wood pellets. The measured values also showed that increasing the temperature of ash preparation from 550 to 815 °C can increase the resulting values of melting temperature. The most significant proportion of the fraction size on the resulting melting temperatures was observed for beech with 5% and 10% of masks at an ash temperature of 550 °C and for spruce with 10% of masks at an ash temperature of 815 °C.