0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Environmental Sources Sign in to save

Effect of a New Additive Based on Textile Fibres from End-of-Life Tyres (ELT) on the Mechanical Properties of Stone Mastic Asphalt

Polymers 2023 6 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 40 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Gonzalo Valdés, Alejandra Calabi-Floody, Cristian Mignolet-Garrido, Cristian Díaz-Montecinos

Summary

Researchers evaluated waste tyre textile fibre (WTTF)-based additives as a replacement for cellulose fibres in stone mastic asphalt mixes, finding that 100% replacement met design and performance requirements, offering a sustainable approach to recycling end-of-life tyre by-products in road construction.

Stone Mastic Asphalts (SMA) are asphalt mixes with discontinuous granulometry and a high content of asphalt binder. In order to prevent draindown of the asphalt binder and ensure good performance, these mixes must be strengthened with cellulose or mineral fibres and/or polymer additives. This study was designed to evaluate the effect of a granular additive based on waste tyre textile fibres (WTTF), developed as a replacement for cellulose commercial additives in SMA mixes. Use of the WTTF-based additive will encourage the development of sustainable mixes by recycling a by-product of end-of-life tyres (ELT), which currently constitute a major environmental problem around the world. To this end, in the present experimental study we evaluated the replacement of cellulose-based commercial fibre with different percentages of WTTF-based additive (0%, 50%, 75%, 100%) in an SMA asphalt mix. The following design and performance properties were evaluated: resistance to cracking, stiffness modulus, sensitivity to moisture, and resistance to permanent deformation. The results indicated that replacing 100% of the cellulose commercial additive in the SMA mix by the WTTF-based additive allowed the mix to meet its design properties and showed good performance in the mechanical properties evaluated, with behaviour similar to that of the reference SMA mix.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Effects of marine microplastics on the mechanical performance of bituminous binder for road asphalt pavements

Researchers investigated the effects of marine-sourced microplastics as additives in bituminous binders used for road asphalt pavements, finding that incorporating marine microplastics into bitumen improved mechanical road performance while simultaneously providing a recycling pathway for plastic waste collected from marine environments.

Article Tier 2

Waste Plastic to Roads – HDPE-modified Bitumen and PET Plastic Fibres for Road Maintenance in South Africa: A Review

This study evaluated waste plastic incorporation into road materials, testing HDPE-modified bitumen and PET plastic fibers as road material additives and assessing mechanical performance and durability compared to conventional asphalt.

Article Tier 2

Influence of Plastic Waste on the Workability and Mechanical Behaviour of Asphalt Concrete

Researchers found that incorporating plastic waste into asphalt concrete using a dry process improved selected mechanical properties including stiffness and fatigue resistance in some formulations while maintaining acceptable workability, supporting plastic waste as a viable bitumen extender for road construction.

Article Tier 2

Enhancing High-Performance Concrete with Waste Rubber Tyre Aggregates: A Sustainable Approach

Researchers investigated the mechanical properties and sustainability performance of high-performance concrete incorporating waste rubber tyre aggregates, finding that rubber additions improve toughness and reduce environmental impact while meeting structural performance requirements.

Article Tier 2

Applications of Synthetic, Natural, and Waste Fibers in Asphalt Mixtures: A Citation-Based Review

This review analyzed the use of synthetic, natural, and waste fibers in asphalt mixtures through citation-based analysis, finding that fiber reinforcement improves mechanical performance of asphalt while offering ecological sustainability benefits, though concerns about microplastic release from synthetic fibers remain.

Share this paper