We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics in Harbour Seawaters: A Case Study in the Port of Gdynia, Baltic Sea
Summary
Microplastics were measured in five basins of the Port of Gdynia in the Baltic Sea across four seasons, finding concentrations of 0.082-0.524 mg per cubic meter, with polyolefins dominant and fragments and fibres the most common shapes in harbour surface waters.
An important source of microplastics (MPs) in the Baltic Sea waters is plastic waste, which is fragmented in the natural environment. The pilot research on the identification of microplastics in the surface waters of the Port of Gdynia is presented. In this paper, microplastics of particle sizes 0.3–5 mm in harbour seawaters were investigated. Microplastics were collected from five harbour basins using an unmanned mobile research unit, HydroDron-1. Sampling of microplastics on the surface port water was conducted over four seasons. The collected plastic particles were separated by chemical oxidation and flotation in the NaCl solution (density 1.2 g/cm3). Polymer identification was carried out by visual and microscopic observations, as well as using the Total Reflection Fourier Transform Infrared spectroscopy. Based on tows conducted in five basins of the Port of Gdynia, in total, the concentration of microplastics identified ranged from 0.082 mg/m3 to 0.524 mg/m3, depending on the investigated basin. Four groups of microplastic shapes (fragments, films, fibres and spheres) were detected in all the investigated harbour basins. Fragments and fibres were prevalent when categorised by particle shape, whereas when categorised by colour, transparent, white and black particles were dominant. The predominant type of the identified polymers was polyolefins (PE, PP, PS) and their derivatives.
Sign in to start a discussion.
More Papers Like This
Determination of Selected Organic Contaminants in the Port of Gdynia Sediments: Towards Cleaner Baltic Ports
Researchers assessed dioxin and microplastic contamination in bottom sediments from the Port of Gdynia on the Baltic Sea, providing preliminary baseline data on organic pollutants and plastic particles in a major European seaport. Polyolefins were the dominant plastic types identified by spectroscopic analysis.
Occurrence and spatial distribution of microplastics in the surface waters of the Baltic Sea and the Gulf of Riga
Microplastic abundance and composition were compared between the Gulf of Riga and the Eastern Gotland Basin of the Baltic Sea, with higher concentrations in the Gulf of Riga near river mouths and urban coasts, and polypropylene and polyethylene dominating the polymer composition at most sites.
Plastic contamination of sandy beaches along the southern Baltic – a one season field survey results
Researchers surveyed microplastic and macroplastic contamination along the Polish Baltic Sea coast, finding microplastic concentrations of 118–1,382 pieces/kg in beach sand and 0.61–2.76 pieces/dm3 in coastal waters, with sub-1 mm blue fibers dominating across all sites and suggesting a common fibrous source throughout the Polish coastal zone.
Assessing the Occurrence and Distribution of Microplastics in Surface Freshwater and Wastewaters of Latvia and Lithuania
Researchers measured microplastic concentrations in surface water and wastewater across four Baltic cities in Latvia and Lithuania, finding an average of 16.63 particles/L with fibers as the dominant shape and polyethylene terephthalate as the most common polymer, with municipal and hospital wastewater identified as the primary contamination sources.
Spatiotemporal Variability of Microplastics in the Eastern Baltic Sea
Researchers documented spatiotemporal variability of microplastics in the eastern Baltic Sea over five years, finding concentrations ranging from 0.01 to 2.45 particles per cubic meter with patterns linked to proximity to urban areas and riverine inputs.