We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Simultaneous removal of microplastics and benzalkonium chloride using electrocoagulation process: statistical modeling and techno-economic optimization
Summary
An electrocoagulation process simultaneously removed microplastics and the disinfectant benzalkonium chloride from water, achieving 82.5% microplastic and 90.35% DDBAC removal under optimized conditions of pH 7.4, 80 minutes, 0.05 M electrolyte, and 12.59 V.
Microplastics and benzyldimethyldodecylammonioum chloride (DDBAC) enter the environment more frequently during the COVID-19 pandemic and their co-occurrence will be a potential threat to the environment in the post-pandemic era. This study investigates the performance of an electrochemical system for the simultaneous removal of microplastics and DDBAC. During experimental studies, effects of applied voltage (3-15 V), pH (4-10), time (0-80 min), electrolyte concentration (0.01-0.0.09 M), electrode configuration, and perforated anode were investigated to identify their influence on DDBAC and microplastics removal efficiency. Eventually, the techno-economic optimization yielded to evaluate the commercial feasibility of this process. The central composite design (CCD) and analysis of variance (ANOVA) are employed for evaluation and optimization of the variables and response, DDBAC-microplastics removal, and for determining the adequacy and significance of mathematical models proposed by response surface methodology (RSM). Experimental results indicate that optimum conditions are pH = 7.4, time = 80 min, electrolyte concentration = 0.05 M, and applied voltage = 12.59, in which the removal of microplastics, DDBAC, and TOC reached the maximum level, which was 82.50%, 90.35%, and 83.60% respectively. The results confirm that the valid model is adequately significant for the target response. Overall, financial and energy consumption analyses confirmed that this process is a promising technology as a commercial method for the removal of DDBAC-microplastics complexes in water and wastewater treatment.
Sign in to start a discussion.
More Papers Like This
Enhancement of Water Quality Parameters with Microplastics via Electrocoagulation
Researchers investigated the use of electrocoagulation to enhance water quality parameters and remove microplastics from water, comparing primary and secondary microplastic types. They found that electrocoagulation effectively reduced microplastic concentrations alongside other water quality parameters, demonstrating its potential as an integrated treatment technology for microplastic-contaminated water.
Degradation of microplastics by electrocoagulation technology: Combination oxidation and flocculation effects
Researchers evaluated electrocoagulation technology for removing four common types of microplastics from water and discovered that the process works through both oxidation and flocculation mechanisms. Flocculation accounted for the majority of removal (69-77%), while electrochemical oxidation via hydroxyl radicals contributed an additional 8-21% depending on the plastic type. The study found that PVC and polypropylene were removed most effectively due to their hydrophilic properties, and a neutral pH of 7 provided the best balance between the two removal mechanisms.
Assessment of Electrocoagulation Process Efficiency in the Removal of PVC Microplastics from Synthetic Seawater
Researchers investigated and optimized electrocoagulation as a method for removing PVC microplastics from marine environments, evaluating its efficiency compared to other treatment approaches and identifying suitable operating parameters.
Coagulation technologies for separation of microplastics in water: current status
This review examines how coagulation water treatment technologies can remove microplastics from water. Conventional coagulation achieves 8-98% removal efficiency while electrocoagulation achieves 8-99%, depending on conditions, offering a potentially effective approach for reducing microplastics in drinking water and wastewater.
Electrochemical remediation of microplastics: Progress and prospects in water treatment
This review examines electrochemical methods for removing microplastics from water, including electrocoagulation, electro-oxidation, and the electro-Fenton process. Evidence indicates that electro-oxidation can achieve removal rates as high as 99 percent under optimized conditions. The study highlights these techniques as promising alternatives for water treatment but calls for further research to scale them up for real-world applications.