We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Synthesis and Evaluation of Alum Crystals from Waste Aluminum Foils in Turbid Water Treatment
Summary
Researchers synthesized aluminum alum from recycled waste aluminum foil and tested its effectiveness as a water treatment coagulant for removing turbidity. Recycling aluminum waste into useful water treatment chemicals represents both a waste reduction and water quality improvement strategy.
The disposal of waste aluminum foil is a significant environmental concern due to its non-biodegradable nature and potential to contaminate the surrounding ecosystem. In this study, we synthesized alum crystals from waste aluminum foil and evaluated their potential as an effective adsorbent for water treatment. The synthesis process involved the reaction of crushed aluminum foil with sulfuric acid and sodium hydroxide to form aluminum hydroxide, which was then converted to alum crystals through a precipitation reaction. Chemical tests were conducted to confirm the presence of different ions in alum solution and solid alum crystals. The tests showed the presence of sulfate ions, potassium ions, and aluminum ions. Additionally, the study examined the effect of different dosages (10 to 100 mg/l) of alum on turbidity removal (triplicate) in water, where increasing the alum dosage led to an increase in turbidity removal, but beyond a certain point, the marginal increase in turbidity removal diminished. A dosage of around 40–50 mg/L was established as optimal for achieving a balance between effective turbidity removal and cost-effective use of alum, using a quadratic relationship to model a non-linear relationship between turbidity removal and alum dosage. This study demonstrates the potential of waste aluminum foil as a valuable resource for the synthesis of alum crystals, which can be used as an effective adsorbent for water treatment. Using waste materials for the synthesis of value-added products not only helps reduce environmental pollution but also contributes to the development of sustainable technologies. The results of this study have significant implications for the development of cost-effective and environmentally sustainable solutions for water treatment.
Sign in to start a discussion.
More Papers Like This
Microplastics and nanoplastics in water: Improving removal in wastewater treatment plants with alternative coagulants
Laboratory tests showed that conventional aluminum sulfate (alum) coagulant becomes much less effective at removing micro- and nanoplastics from water at pH above 7.8—a common condition in municipal wastewater—but switching to aluminum chlorohydrate largely restores removal efficiency. This matters because wastewater treatment plants are a critical barrier preventing microplastics from entering rivers and oceans, and many currently use alum. The study gives water utilities a practical, drop-in solution to significantly improve microplastic capture under challenging water chemistry.
Microplastics removal from aquatic environment by coagulation: Selecting the best coagulant based on variables determined from a systematic review
This systematic review and experimental study identifies the most effective methods for removing microplastics from water using coagulation, a common water treatment technique. Researchers tested different coagulants on three types of microplastics and found that aluminum-based coagulants were most effective. These findings could help water treatment plants better remove microplastics from the water supply before it reaches our taps.
Investigating the Potential of Coagulants to Improve Microplastics Removal in Wastewater and Tap Water
Researchers found that adding coagulants (FeCl3 or Al2(SO4)3) to wastewater and tap water improved microplastic removal, with aluminum sulfate achieving 43% and 62% removal efficiencies respectively, though the high concentrations required suggest that combining coagulants with organic polyelectrolytes could improve practicality.
Evaluation of Efficiently Removing Secondary Effluent Organic Matters (EfOM) by Al-Based Coagulant for Wastewater Recycling: A Case Study with an Industrial-Scale Food-Processing Wastewater Treatment Plant
Not relevant to microplastics — this study evaluates aluminium-based coagulants for removing organic matter from food-processing wastewater to enable safe water reuse.
Durable Superhydrophobic Coating for Efficient Microplastic Removal
Researchers developed a durable superhydrophobic (water-repelling) coating on aluminum that can efficiently capture and remove microplastic particles from water. The coating attracted microplastics at high removal rates and remained effective over multiple use cycles. This type of material could be incorporated into water treatment systems or filtration devices to reduce microplastic contamination in drinking water and wastewater.