We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Valorization of Face Masks Produced during COVID-19 Pandemic through Hydrothermal Carbonization (HTC): A Preliminary Study
Summary
Researchers conducted a preliminary study of hydrothermal carbonization (HTC) at 220 degrees C as a method for valorizing disposable surgical face masks generated during the COVID-19 pandemic, characterizing the resulting hydrochar via TGA, SEM, FTIR, and nitrogen physisorption and finding that masks melted and formed composite carbonaceous materials.
The COVID-19 pandemic has led to the increased use of disposable face masks worldwide, resulting in a surge of potentially infectious waste. This waste must be safely managed and disposed of to prevent the spread of the virus. To address this issue, a preliminary study explored the use of hydrothermal carbonization (HTC) as a potential method for converting surgical mask waste into value-added carbonaceous materials. The HTC treatments were conducted at 220 °C for 3 h with or without the addition of acetic acid. The resulting hydrochar was characterized using several techniques, including thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and N2-physisorption analyzers. The study found that the masks formed a melt with reduced mass (−15%) and volume (up to −75%) under the applied conditions. The carbon content and higher heating value (HHV) of the produced hydrochars were higher than those of the original masks (+5%). Furthermore, when acetic acid was added during the HTC experiment, a new crystal phase, terephthalic acid, was produced. This acid is a precursor in surgical mask production. The study suggests that hydrothermal carbonization could potentially achieve sanitization and volume reduction in non-renewable and non-biodegradable surgical masks while also producing a solid fuel or a raw material for terephthalic acid production. This approach offers an innovative and sustainable solution to manage the waste generated by the increased use of disposable face masks during the pandemic.
Sign in to start a discussion.
More Papers Like This
Thermal characteristics and combustion reactivity of coronavirus face masks using TG-DTG-MS analysis
Researchers characterized the thermal combustion behavior of new and used COVID-19 face masks using simultaneous thermogravimetric and mass spectrometry analysis, finding that heating rate significantly influences ignition and burnout indices and that masks undergo complex multi-step polymer degradation pathways relevant to evaluating their potential for waste-to-energy conversion.
Thermogravimetric analysis of face mask waste: Kinetic analysis via iso-conversional methods
Researchers analyzed the thermal decomposition of discarded face masks — which contain plastic microfibers — to evaluate their potential for energy recovery through pyrolysis. The COVID-19 pandemic generated enormous quantities of mask waste, and understanding their thermal behavior can inform strategies for safely processing this new category of plastic waste.
Low-Pressure Hydrothermal Processing of Disposable Face Masks into Oils
Researchers developed low-pressure hydrothermal processing methods to convert disposable face masks into oils, finding that oil yield and composition varied by feedstock material, particle size, and reaction conditions. With 5.4 million tons of face masks generated annually, converting them to oils offers a potential waste management pathway.
Study of Energy Valorization of Disposable Masks via Thermochemical Processes: Devolatilization Tests and Simulation Approach
Researchers investigated the thermochemical energy valorization of disposable surgical and FFP2 face masks through pyrolysis and gasification in a laboratory-scale fluidized bed reactor at four temperature levels and three operating conditions, characterizing the produced syngas composition via GC-MS and proposing a hybrid experimental-simulation model for the gasification process.
Waste Surgical Masks as Precursors of Activated Carbon: A Circular Economy Approach to Mitigate the Impact of Microplastics and Emerging Dye Contaminants
Waste surgical masks were converted into activated carbon materials through pyrolysis, demonstrating a circular approach for handling the surge in disposable mask waste generated during the COVID-19 pandemic. Repurposing mask waste as functional carbon avoids its fragmentation into microplastics in the environment.