We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Fluorine recovery through alkaline defluorination of polyvinylidene fluoride
Summary
Researchers investigated the chemical defluorination of polyvinylidene fluoride (PVDF) waste using alkaline conditions and phase transfer catalysts, exploring a route for fluorine recovery from fluoropolymer waste to support fluorine recycling.
Abstract The establishment of technological approaches for the defluorination of waste fluoropolymers and recovery of eliminated F – may contribute to the development of fluorine recycling routes. In this study, we investigated the effects of alkalinity, phase transfer catalyst (PTC) concentration, reaction temperature, and solvent types on the defluorination of polyvinylidene fluoride (PVDF) by alkaline wet processing. The rate of defluorination of PVDF in 4.0 M sodium hydroxide (NaOH) and 50 mM tetrabutylammonium bromide (TBAB) under aqueous conditions reached 89.2%. In addition, the defluorination reaction proceeded faster in solvents such as diethylene glycol (DEG) and triethylene glycol (TEG) than in water because of the high affinity between PVDF and these diols. To investigate the feasibility of developing a fluorine recycling route, the defluorination of a photovoltaic (PV) backsheet and subsequent CaF 2 precipitation from the eliminated F – was examined. A total of 88.3% of F contained in the PV backsheet was recovered as CaF 2 , which satisfied the quality standards of commercial fluorspar. This study demonstrated that alkaline wet processing is effective for the defluorination of PVDF and that the establishment of a F recycling route along the F supply chain may be feasible.
Sign in to start a discussion.
More Papers Like This
A hydrogen bond-driven strategy with ultrasound assistance for ultrafast and efficient recovery of PVDF nanoplastic from polymer solid electrolytes of all-solid lithium-ion batteries
This study tackles the environmental problem of spent lithium-ion batteries leaking PVDF (a fluorinated plastic) into the environment by developing an eco-friendly, ultrasound-assisted process that recovers 98% of the material in a short time using green solvents. The approach significantly outperforms traditional recycling methods, offering a practical route to prevent nanoplastic contamination from discarded battery components.
Fluoride recovery in degradable fluorinated polyesters
Researchers synthesized a new class of degradable fluorinated polyesters by copolymerizing tetrafluorophthalic anhydride with propylene oxide or trifluoropropylene oxide, achieving up to 20 times faster degradation than non-fluorinated equivalents. The materials also allow fluoride recovery, offering potential for more sustainable use of fluorinated polymers.
Upvaluing chlorinated plastic wastes
This review explores strategies for upcycling chlorinated plastic waste such as polyvinyl chloride, which poses particular recycling challenges due to its chlorine content. Researchers highlight emerging green methods for converting these materials into valuable chemical products, addressing a critical bottleneck in plastic waste management.
Lithium-ion battery recycling: a source of per- and polyfluoroalkyl substances (PFAS) to the environment?
Researchers reviewed the use of fluorinated substances, particularly per- and polyfluoroalkyl substances (PFAS), in lithium-ion batteries and the risks posed by battery recycling processes. The study suggests that while high-temperature pyrometallurgy can mineralize PFAS, the increasingly popular lower-temperature hydrometallurgy approach may lead to incomplete degradation and release of persistent fluorinated substances.
Releaseof Fluoro-Contained Free Radicals and Polyfluorinated-LikeMolecules from Photoaged Fluorinated Microplastics: Identificationand Formation Mechanisms
Researchers investigated the photochemical transformation of fluorinated microplastics (PVDF and PTFE) under UV-A irradiation, identifying the release of persistent carbon-centered free radicals and polyfluorinated-like molecular fragments. The study revealed that photoaging of fluorinated plastics generates reactive species capable of redox activity, suggesting these materials pose underappreciated environmental hazards beyond physical particle pollution.