We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Characteristics of Wires of the Long-Operated Aluminum-Steel Cable at Different Places on an Overhead Power Line Span
AI summary Read the abstract
This materials science paper examines the structural and mechanical properties of aluminum-steel cable wires from long-operated power lines. This is an engineering paper with no direct relevance to microplastics or environmental health.
During operation, cables of overhead power lines (OPLs) are exposed to the impact that differs in separate parts of the OPL span due to the different responses of cables near the clamps and far from them. This paper presents the results of a study of aluminum and steel wires cut from such separate parts of ACSR cables before and after exploitation. Structural, microstructural, and elastic–microplastic properties of wires and their changes during operation were studied through optical microscopy, energy-dispersive X-ray microanalysis, electron backscattering diffraction, X-ray diffraction, densitometry, and acoustic measurements. The characteristics of the properties of the wires along the span were found to change in a coordinated manner. Numerical estimates of the influence of the steel core on aging the ACSR cable were obtained. Changes in the properties of the wires, as well as oxidization and corrosion of their near-surface layers, were studied in detail. Quantitative values of the characteristics of properties, the most distant from those observed in the new wires, were revealed for samples of aluminum and steel wires cut from the cable at 1/4 span and near clamps. It is assumed that these cable parts should be the most crucial for cable durability.
More Papers Like This
Comparison of Structural, Microstructural, Elastic, and Microplastic Properties of the AAAC (A50) and ACSR (AC50/8) Cables after Various Operation Periods in Power Transmission Lines
AI summary Read the abstract
This study compared the structural and mechanical properties of aluminum cables used in overhead power transmission lines after different periods of operation. Both all-aluminum alloy and aluminum-steel reinforced cable types were tested for hardness, elastic modulus, and microstructural changes with age. Understanding cable degradation is important for maintaining safe and reliable electrical infrastructure.
Modification of the Structural, Microstructural, and Elastoplastic Properties of Aluminum Wires after Operation
AI summary Read the abstract
Structural and microstructural changes in aluminum wires from overhead power transmission lines of 0 to 62 years service life were characterized using X-ray diffraction and electron backscatter diffraction, finding progressive work hardening and grain boundary changes that affect wire strength and longevity.
Structural, Microstructural, Elastic, and Microplastic Properties of Aluminum Wires (from AAAC (A50) Cables) after Fatigue Tests
AI summary Read the abstract
Researchers characterized the structural, microstructural, elastic, and microplastic deformation properties of aluminum wires from AAAC (A50) overhead power line cables after laboratory fatigue testing, using X-ray diffraction, electron backscatter diffraction, densitometry, and acoustic methods to identify degradation patterns relevant to predicting cable lifespan.
The Structure of the Near-Surface Layer of the AAAC Overhead Power Line Wires after Operation and Its Effect on Their Elastic, Microplastic, and Electroresistance Properties
AI summary Read the abstract
Researchers investigated the near-surface defect layers of All Aluminum Alloy Conductor overhead power line wires after 0 to 62 years of operation using X-ray diffraction, electron backscattering diffraction, optical microscopy, and resistivity measurements. They found two characteristic layer thicknesses of approximately 30 to 50 µm and 56 to 140 µm, with near-surface layer thickness increasing at a rate of approximately 4 µm per year over the first 18 years of service.
A continuum damage mechanics model for fatigue and degradation of fiber reinforced materials
AI summary Read the abstract
This engineering paper presents a mathematical model describing how fiber-reinforced materials degrade under repeated loading, using microplastic deformation as the driving mechanism for damage accumulation. It is a materials science study with no direct relevance to environmental plastic pollution or human health.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.