0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Policy & Risk Remediation Sign in to save

Acid leaching of hydrothermally carbonized sewage sludge: phosphorus recovery and hydrochar characteristics

Frontiers in Environmental Engineering 2023 3 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 35 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Vicky Shettigondahalli Ekanthalu, Tommy Ender, Satyanarayana Narra, Edward Antwi, Saptarshi Bej, Michael Nelles

Summary

Researchers investigated acid leaching of hydrochar produced by hydrothermal carbonisation of sewage sludge to recover phosphorus, comparing formic, sulfuric, and acetic acids at varying concentrations and pH levels. Response surface modelling showed that a small fraction of sulfuric acid was sufficient to maintain low pH for phosphorus mobilisation, with carbonisation temperature, acid type, and contact time all influencing total phosphorus recovery and hydrochar fuel characteristics.

Body Systems

The options for managing sewage sludge and its utilization as fertilizer are becoming progressively limited as a result of stringent environmental regulations imposed by the European Union over the past 10 years. The limitation of moisture present in sewage sludge that affects conventional treatment options like incineration can be obviated by using the hydrothermal carbonization (HTC) process. This research investigates the acid leaching of hydrochar produced by hydrothermally carbonizing sewage sludge. The objective is to investigate and compare the effects of formic acid (HCOOH), sulfuric acid (H 2 SO 4 ), and acetic acid (CH 3 COOH) at varying pH levels on total phosphorus (TP) mobilization and hydrochar properties. The impact of independent parameters such as carbonization temperature of hydrochar, acid type, acid concentration, and acid leaching retention time on the TP mobilization, chemical oxygen demand (COD) of the leachate, and the fuel characteristic of the hydrochar was explored. A quadratic and cubic model was proposed to correlate the effects of independent parameters on TP and ortho-P mobilization, acid need, COD of leachate, and fuel characteristics of hydrochar using Design of Experiments and Response Surface Modeling. This approach was chosen in order to maximize the amount of data from a constrained number of experimental trials. The outcome of the study indicated a fractional amount of H 2 SO 4 was enough to reach and maintain the lower pH in hydrochar slurry compared to HCOOH and CH 3 COOH. TP mobilization from solid to liquid is highly favorable in the presence of H 2 SO 4 at lower pH compared to HCOOH and CH 3 COOH under similar reaction conditions. In addition, it was discovered that lowering the pH using HCOOH and H 2 SO 4 to acid-leach the hydrochar boosted the caloric value of the hydrochar. However, CH 3 COOH has a contradictory effect.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Retrieval of carbon and inorganic phosphorus during hydrothermal carbonization: ANN and RSM modeling

Researchers studied the recovery of carbon and inorganic phosphorus during hydrothermal carbonization of biomass feedstocks, optimizing conditions to maximize nutrient and carbon retention in the resulting hydrochar. Recovered hydrochar was proposed as a soil amendment combining carbon sequestration with phosphorus recycling.

Article Tier 2

Hydrothermal Carbonization of Sewage Sludge with Sawdust and Corn Stalk: Optimization of Process Parameters and Characterization of Hydrochar

Researchers optimized co-hydrothermal carbonization of sewage sludge mixed with sawdust and corn stalk using response surface methods, finding that 205°C, 30-minute reaction time, and pH 5 maximized hydrochar heating value and energy yield, producing a solid fuel that could reduce disposal burdens from wastewater treatment plants.

Article Tier 2

Sewage Sludge Valorization via Hydrothermal Carbonization: Optimizing Dewaterability and Phosphorus Release

This study optimized conditions for hydrothermal carbonization of sewage sludge, finding that the process improves sludge dewaterability and can release phosphorus for potential nutrient recovery. While not directly about microplastics, sewage sludge is a major reservoir of microplastics that accumulates during wastewater treatment, and managing sludge safely is important for preventing plastic particles from reaching agricultural soils.

Article Tier 2

The Effect of Hydrothermal Carbonization Temperature on Microplastic Content in Digested Sewage Sludge and Its Relation to the Fuel Properties of Hydrochars

Hydrothermal carbonization temperature was found to influence how microplastics are transformed into hydrochar, affecting the properties of the resulting material. Optimizing this process could convert plastic waste into useful biochar-like materials while reducing the persistence of microplastics in the environment.

Article Tier 2

Thermal Disposal of Post-processing Water Derived from the Hydrothermal Carbonization Process of Sewage Sludge

Distillation was tested as a purification method for post-processing liquid from hydrothermal carbonization of sewage sludge, achieving over 95% removal of COD, TOC, phosphate, phenols, heavy metals, and chlorine, providing a viable approach for treating this complex waste stream.

Share this paper