0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Environmental Sources Remediation Sign in to save

Effect of Types and Depths of Media Filter to Reducing Turbidity Concentration

INSOLOGI Jurnal Sains dan Teknologi 2023 Score: 30 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Fikry Ardianto, Euis Nurul H, Tuhu Agung, Aussie Amalia

Summary

This study compared the effectiveness of silica and zeolite filter media at different depths for reducing water turbidity. Improved filtration methods for water treatment are relevant for microplastic removal, as similar rapid sand filtration approaches can capture plastic particles from drinking water.

Study Type Environmental

Rapid sand filter is used to decrease the turbidity consentration. This research purpose is find the comparation of variation media to reduced turbidity from Wonokromo River. Silica and zeolite are used to be the media of rapid sand filter with effective sizes of 0,20 mm and 1,40 mm. Variation that used in this research are rapid sand filter single media and dual media with depth of 60 and 80 cm in each variation. Rapid sand filter dual media uses silica and zeolite with the comparison of 50 : 50. The result showed that every variation has more than 50% removal of turbidity. Rapid sand filter single media with 60 cm of depth reach 84,35% of turbidity removal and with 80 cm of depth reach 92,22% of turbidity removal. Rapid sand filter dual media (silica and zeolite) with 60 cm of depth reach 73,48% and with 80 cm of depth reach 87,77%. Result showed that rapid sand filter single media with 80 cm of depth reach the highest removal in every variation. It’s concluded that the media depth and sizes effect the effictivity of turbidity removal.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

The Effect of Filter Media Size and Loading Rate to Filter Performance of Removing Microplastics using Rapid Sand Filter

This study evaluated how filter media size and hydraulic loading rate affect rapid sand filter performance in removing microplastics from water. Smaller sand media (0.39 mm) and lower loading rates achieved greater MP removal, suggesting that optimizing these parameters can improve conventional water treatment for plastic particles.

Article Tier 2

Performance of Rapid Sand Filter Dual Media for Microplastic Removal in the Water: The Effect of Microplastic Size and Effective Size of Filter Media

This study tested how well rapid sand filters with dual media can remove microplastics from drinking water, examining the effects of different microplastic sizes and filter media configurations. Researchers found that filter performance varied depending on the size of the plastic particles and the effective size of the filter media, providing practical insights for improving drinking water treatment systems.

Article Tier 2

Performance of rapid sand filter – single media to remove microplastics

This study evaluated the performance of a rapid sand filter as a single-media drinking water treatment step for microplastic removal, finding moderate removal efficiency that varied with particle size and filter operation parameters.

Article Tier 2

Investigations and comparison of a conventional sand filter and a modified sand filter for water purification.

This study compared the performance of conventional sand filters and modified sand filters for purifying drinking water. Improving the efficiency of sand filtration is relevant to microplastics research since enhanced sand filters have shown potential for removing microplastic particles from drinking water supplies.

Article Tier 2

Rapid Sand Filtration Technique for Remediation of Microplastics

Researchers tested rapid sand filtration as a technique for removing microplastics from water, evaluating particle removal efficiency across different plastic sizes, shapes, and filter media. The technique achieved meaningful microplastic reduction and was proposed as a practical water treatment enhancement.

Share this paper