We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Affinity capture of nanoplastics and their thermogravimetric quantification on plasma polymer coated filters
AI summary Read the abstract
Researchers coated cellulose filters with different plasma polymer films and used thermogravimetric analysis to capture and quantify nanoplastics by their characteristic thermal degradation signatures, demonstrating that surface chemistry can improve retention — hydrophobic coatings for polystyrene, hydrophilic for PMMA — as a simple, low-cost nanoplastic screening method.
Nanoplastics (NPs) are an emerging pollutant of concern due to their potential environmental and health impacts. Yet their detection and quantification remain analytically challenging. Conventional filtration methods often fail to effectively capture particles below 100 nm, and existing analytical techniques are limited by high cost, low throughput, or extensive sample preparation. This study presents a proof-of-concept approach for the passive capture and thermogravimetric quantification of nanoplastics using plasma polymer-coated mixed cellulose ester (MCE) filters. Plasma polymer films of acrylic acid (AAc), 2-methyl-2-oxazoline (POx), 1,7-octadiene (OD), and perfluorooctane (PFO) were used to modify the surface chemistry of the filters. Coated filters were characterised by ellipsometry, X-ray photoelectron spectroscopy, and contact angle measurements, confirming the desired physicochemical properties. Thermogravimetric analysis (TGA) demonstrated polymer-specific degradation peaks for polystyrene (PS), poly(methyl methacrylate) (PMMA), and polycaprolactone (PCL) NPs, with detection limits as low as 5 μg in the presence of filter material. Affinity-based capture was evaluated by filtering NP suspensions through coated and uncoated filters, with quantification by TGA and visual assessment via SEM. Results showed improved retention of PS on hydrophobic (PFO) filters and PMMA on hydrophilic (POx) filters, consistent with expected surface interaction mechanisms. While overall recovery was low, TGA proved to be a sensitive and reliable method for quantifying retained NPs above a threshold mass. This work demonstrates the potential of combining surface-engineered filters with TGA as a simple, low-cost screening method for nanoplastics, and highlights the importance of surface chemistry in improving capture efficiency for nanoscale contaminants.
More Papers Like This
Methods for the Detection and Quantification of Micro and Nanoplastics- A Review
AI summary Read the abstract
This review covers analytical methods for detecting and quantifying micro- and nanoplastics across environmental samples, evaluating spectroscopic, microscopic, and thermal techniques. It assesses the strengths and limitations of each approach for different sample matrices.
Determination of microplastic polyethylene (PE) and polypropylene (PP) in environmental samples using thermal analysis (TGA-DSC)
AI summary Read the abstract
This study developed a thermal analysis method using thermogravimetric analysis (TGA) to determine the mass concentration of polyethylene and polypropylene microplastics in environmental samples. The approach is cost-effective and straightforward, offering an alternative to the more expensive spectroscopic methods commonly used for microplastic identification.
Current techniques for identifying, quantifying, and characterizing micro and nanoplastics with emphasis on strengths, limitations, and challenges
AI summary Read the abstract
Researchers reviewed current analytical techniques for identifying, quantifying, and characterizing micro- and nanoplastics across environmental matrices. The review highlights the strengths and limitations of methods including FTIR, Raman spectroscopy, and pyrolysis-GC/MS, and calls for standardization to improve comparability across studies.
Thermal fragmentation enhanced identification and quantification of polystyrene micro/nanoplastics in complex media
AI summary Read the abstract
Researchers developed a method using thermal fragmentation combined with MALDI-TOF mass spectrometry to identify and quantify polystyrene micro/nanoplastics in complex media, enabling reliable fingerprint-based detection and quantification down to nanoplastic size ranges.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.