Nanoplastics removal from spiked laundry wastewater using electro-peroxidation process

Microplastics and nanoplastics (NPs) in laundry wastewater (LWW) are major sources of plastic particles in wastewater treatment plants. Unlike microplastics, almost no information exists in the literature on the degradation of NPs in LWW. In this work, the degradation of NPs in commercial LWW by the electro-peroxidation process is investigated. The obtained results demonstrated that already existing ions in LWW such as Cl contribute to faster degradation of NPs and a complete removal could be obtained as fast as 40 min. In addition, three-dimensional excitation and emission matrix fluorescence analysis was performed, which revealed humic acid-like, aromatic proteins-like, and fulvic acid-like compounds could be oxidized after 20, 40, and 60 min of treatment respectively. The effects of operating parameters on the process performance were then examined by response surface methodology (RSM) models. The results showed that initial TOC concentration was the most important parameter influencing negatively the percentage of NP degradation. Afterward, optimization of the process revealed that the energy consumption could be minimized at 31.2 mA/cm, 0.025 mol/L [NaSO], and 52 min treatment time for 52.2 mg/L initial TOC. Finally, analysis of treated LWW showed no toxicity on Daphnia magna. This study showed that the electro-peroxidation process can completely degrade NPs in LWW without any remaining toxic compounds.