We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Scalable electrosynthesis of commodity chemicals from biomass by suppressing non-Faradaic transformations
Summary
This study developed a new reactor system for converting plant-based materials into useful chemicals using electricity, achieving high efficiency at large scale. While not directly about microplastics, the technology produces FDCA, a building block for biodegradable plastics that could replace conventional plastics and reduce microplastic pollution. Scaling up alternatives to petroleum-based plastics is one strategy for addressing the microplastics crisis at its source.
Electrooxidation of biomass platforms provides a sustainable route to produce valuable oxygenates, but the practical implementation is hampered by the severe carbon loss stemming from inherent instability of substrates and/or intermediates in alkaline electrolyte, especially under high concentration. Herein, based on the understanding of non-Faradaic degradation, we develop a single-pass continuous flow reactor (SPCFR) system with high ratio of electrode-area/electrolyte-volume, short duration time of substrates in the reactor, and separate feeding of substrate and alkaline solution, thus largely suppressing non-Faradaic degradation. By constructing a nine-stacked-modules SPCFR system, we achieve electrooxidation of glucose-to-formate and 5-hydroxymethylfurfural (HMF)-to-2,5-furandicarboxylic acid (FDCA) with high single-pass conversion efficiency (SPCE; 81.8% and 95.8%, respectively) and high selectivity (formate: 76.5%, FDCA: 96.9%) at high concentrations (formate: 562.8 mM, FDCA: 556.9 mM). Furthermore, we demonstrate continuous and kilogram-scale electrosynthesis of potassium diformate (0.7 kg) from wood and soybean oil, and FDCA (1.17 kg) from HMF. This work highlights the importance of understanding and suppressing non-Faradaic degradation, providing opportunities for scalable biomass upgrading using electrochemical technology.
Sign in to start a discussion.
More Papers Like This
Microplastic Recovery and Conversion Pathways: The Most Recent Advancements in Technologies for the Generation of Renewable Energy
This review examines current technologies for recovering energy from microplastics, evaluating pyrolysis, gasification, electrochemical methods, and hybrid biomass-based approaches in terms of energy balance, carbon conversion, product composition, process efficiency, and scalability. The authors found pyrolysis to be the most scalable method, producing valuable oils and gases, but highlighted that all reviewed technologies face challenges handling the heterogeneous composition and small particle sizes characteristic of MP feedstocks.
Single-Step Electrochemical Upcycling of PET: Waste to Value-Added Chemicals, Oral Presentation
Researchers developed a single-step electrochemical method to upcycle PET plastic waste into value-added chemicals and organic materials, targeting the over 70% of plastic that ends up in landfills or oceans where it breaks down into microplastics.
Electrochemical Biomass Upgrading of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid Under Mild Alkaline Media
Researchers developed an electrochemical method to upgrade biomass-derived 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) under mild alkaline conditions, positioning FDCA as a bio-based monomer for producing poly(ethylene furoate) as a green alternative to petroleum-derived plastics. The study demonstrated that electrochemical oxidation under mild conditions offers a viable, lower-emission route to sustainable plastic precursors from renewable biomass feedstocks.
Using dual chamber microbial fuel cells for coupled microplastic biodegradation and bioelectricity production: assessing the effect of substrate
Researchers investigated using dual-chamber microbial fuel cells to simultaneously biodegrade PET microplastics and generate bioelectricity. The study found that microbial consortia in the fuel cell setup could break down microplastics while producing usable electrical energy, offering a potentially sustainable approach to microplastic remediation in wastewater treatment.
The exploitation of bio-electrochemical system and microplastics removal: Possibilities and perspectives
This review explores bio-electrochemical systems as a sustainable alternative for removing microplastics from water, since current removal methods are costly, energy-intensive, and can release toxic chemicals. Bio-electrochemical systems use microorganisms to generate electricity while simultaneously treating wastewater, offering a cleaner approach. Though still in early research stages, this technology could provide an efficient and environmentally friendly way to reduce microplastic contamination in water supplies.