We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Enhanced membrane fouling by microplastics during nanofiltration of secondary effluent considering secretion, interaction and deposition of extracellular polymeric substances
Summary
Researchers found that microplastics significantly worsen membrane fouling during nanofiltration of treated wastewater, increasing both short-term and long-term fouling resistance by up to 46% and 27% respectively. The study reveals that microplastics influence fouling through their effects on bacterial extracellular polymeric substance secretion, interaction with coexisting pollutants, and deposition on membrane surfaces.
Microplastic (MP) has been found to influence membrane fouling during microfiltration/ultrafiltration processes in direct and indirect ways by acting as fouling components and changing microbial activities, respectively. However, there is no relevant research about the contribution of MPs to nanofiltration membrane fouling. In this study, for the first time, the impacts of MPs on membrane fouling during the nanofiltration of secondary effluent (SE) were systematically investigated from the perspective of bacterial extracellular polymeric substances (EPS) secretion, their interaction with coexisting pollutants and also deposition. Membrane flux behaviors indicate that MPs simultaneously aggravated the short-term and long-term membrane fouling resistance of nanofiltration by 46 % and 27 %, respectively. ATR-FTIR, XPS and spectrophotometry spectra demonstrate that the deteriorated membrane fouling by MPs directly resulted from the increased accumulation of protein-like, polysaccharides-like and humic-like substances on membranes. EEM spectra further confirmed that MPs preferred to induce serious cake layers, which dominated membrane flux decline but hindered pore fouling. According to CLSM and SEM-EDS mappings, MPs in SE could stimulate microbial activities and then aggravate EPS secretion, after which their interaction with Ca was also enhanced in bulk solution. The cross-linker nets could promote the deposition of other unlinked pollutants on membranes. Besides, MPs could weaken the rejection of certain dissolved organic matters (from 57 % to 52 % on the 50th day of filtration) by aggravating cake-enhanced concentration polarization (CECP), but improved the average removal of inorganic salts from 58 % to 63 % by improving their back diffusion through cake layers. Based on these analyses, the mechanisms of MP-enhanced membrane fouling during the nanofiltration of SE can be thoroughly revealed.
Sign in to start a discussion.
More Papers Like This
Recent advances on micro/nanoplastic pollution and membrane fouling during water treatment: A review
Researchers reviewed recent advances in understanding how micro- and nanoplastics contribute to membrane fouling during water treatment processes. The study found that while membrane separation effectively removes microplastics from wastewater effluent, fouling caused by plastic particles along with dissolved organics and extracellular polymers remains a key obstacle, and understanding the fouling mechanisms is critical for improving treatment efficiency.
Evaluation of Membrane Fouling by Microplastic Particles in Tertiary Wastewater Treatment Processes
Researchers evaluated membrane fouling caused by microplastic particles during tertiary wastewater treatment, finding that microplastics contributed to fouling through pore blocking and cake layer formation, which reduced membrane performance and treatment efficiency.
Towards microplastics contribution for membrane biofouling and disinfection by-products precursors: The effect on microbes
Researchers found that microplastics in raw water increased microbial growth and altered community composition during ultrafiltration, promoting extracellular polymer production that accelerated membrane fouling and elevated disinfection by-product formation in treated water.
Microplastics fouling and interaction with polymeric membranes: A review
This review examined microplastic fouling of polymeric membranes used in water treatment, analyzing how MPs affect membrane permeability and rejection performance, and discussing strategies — including surface modification and pre-treatment — to mitigate fouling.
New insights into the concentration-dependent regulation of membrane biofouling formation via continuous nanoplastics stimulation
Researchers investigated how different concentrations of nanoplastics affect membrane biofouling by the bacterium Pseudomonas aeruginosa in water filtration systems. They found that low nanoplastic concentrations actually promoted biofilm formation by enhancing bacterial communication and energy metabolism, while high concentrations inhibited it through oxidative stress. The study reveals that nanoplastic pollution can influence water treatment membrane performance in concentration-dependent ways.