We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Refining the mechanistic understanding of microstructural decay during rolling contact fatigue in 52100 bearing steel tempered at high temperature
Summary
Researchers investigated microstructural decay mechanisms during rolling contact fatigue in 52100 bearing steel tempered at 240°C using SEM, electron backscatter diffraction, and transmission electron microscopy, observing that white etching bands formed without preceding dark etching regions and detailing the progression of ferrite microband formation and carbide dissolution.
Abstract Subsurface rolling contact fatigue (RCF) failure occurs beneath heavily loaded hard contacts like gears, bearings, and cams. This study investigates microstructural decay beneath a RCF-tested surface in AISI/SAE 52100 bearing steel tempered at 240 ℃. RCF tests were conducted at 100 ℃ with a maximum Hertzian contact pressure of 4 GPa for four stress cycles. Microstructural characterization utilized scanning electron microscopy, electron backscatter diffraction, transmission Kikuchi diffraction, and transmission electron microscopy. Due to high tempering temperature, white etching bands (WEBs) were observed without preceding dark etching regions. The microstructural decay sequence involved: (1) formation of elongated ferrite and ferrite microbands, (2) complete dissolution of tempered carbides and partial dissolution of residual cementite, (3) formation of WEBs composed of nano-sized ferrite grains (100–300 nm) transformed from ferrite microbands, and (4) appearance of lenticular carbides. Within the WEBs, most nano-sized grains had high-angle grain boundaries, while the fraction of low-angle grain boundaries increased in later stages of RCF. Lenticular carbides formed alongside elongated ferrite and coalesced nano-sized ferritic grains.
Sign in to start a discussion.
More Papers Like This
Chapter 13 | Rolling Contact Microstructural Alterations and Effect on Residual Stress and Fatigue Limit, “Butterflies,” Material Response Analysis, and Modeling of Rolling Contact Fatigue Life
This review examines rolling contact-induced microstructural alterations in bearing steels, including white etching 'butterfly' formations around nonmetallic inclusions, and analyzes their effects on residual stress distribution and fatigue life. The chapter synthesizes materials characterization and computational modeling approaches to understand and predict rolling contact fatigue failure mechanisms.
Material Response to Rolling Contact Loading
This materials science study investigates how rolling contact in ball bearings causes microplastic deformation in steel, leading to crystallographic texture changes, residual stresses, and eventual fatigue failure. The term 'microplastic' in this paper refers to small-scale plastic deformation in metals and has no connection to environmental plastic pollution.
On the effect of microplasticity on crack initiation from subsurface defects in rolling contact fatigue
Researchers used 3D elasto-plastic finite element modeling to numerically demonstrate how microplasticity — yielding behavior below the conventional 0.2% plastic strain threshold — can initiate cracks at subsurface voids in bearing steel under rolling contact fatigue loading. The study compared nonlinear kinematic hardening versus sharp plasticity onset models, showing that smoother onset produces distinctly different patterns of plastic strain and micro-residual stress accumulation around defects.
Dynamic Processes of Substructural Rearrangement under Friction of Carbon Steel
This study examined how heat treatment affects the friction and wear properties of medium carbon steel, linking material microstructure to tribological performance. The research is focused on materials engineering with limited direct relevance to microplastic pollution or human health.
Analysis of the Subsurface Volume of Differently Finished AISI 52100 by Cyclic Indentation and X‐Ray Diffraction
This study analyzed how different surface finishing processes affect fatigue behavior in roller bearing steel, finding that surface roughness and residual stress influence component lifetime. The research is focused on materials engineering and has limited direct relevance to microplastic pollution.